The influence of dispersing structure in multiple drawing on the plasticity of low‑carbon steel
https://doi.org/10.21122/1683-6065-2024-2-54-56
Abstract
During repeated drawing of low‑carbon steel, the initial grain size of ferrite and the intensity of hardening affect the accumulation of defects in the crystal structure and the overall decrease in the plastic properties of cold‑formed wire. Minimizing the cell sizes and reducing the intensity of deformation hardening for a more dispersed initial structure maintain an increased relative contraction of fine‑grained steel after large total compressions. The increase in the tendency to harden coarse‑grained steel is accompanied by an increased decrease in the ductility of the wire during repeated drawing. Large total compressions increase the structural sensitivity of the relative constriction of low‑carbon wire.
References
1. Fetisov V. P. Deformacionnoe uprochnenie uglerodistoj stali [Carbon steel strain hardening]. Moscow, Mir Publ., 2005, 200 p.
2. Morrison W. B., Miller R. L. Plastichnost’ splavov so sverhmelkim zernom [Ultrafine‑Grain metals] Moscow, Metallurgija Publ.,1973, pp. 181–205.
3. Fetisov V. P. Issledovanie lokalizacii plasticheskoj deformacii pri rastyazhenii nizkouglerodistoj stali [Investigation of localization of plastic deformation during stretching of low‑carbon steel]. Lit'e i metallurgiya = Foundry production and metallurgy, 2023, no. 1, pp. 85–87.
4. Wigley D.A. Mekhanicheskie svojstva materialov pri nizkih temperaturah [Mechanical properties of materials at low temperatures] Moscow, Mir Publ., 1974, 374 p.
5. Fetisov V. P. Strukturnye aspekty deformacionnogo uprochneniya pri mnogokratnom volochenii nizkouglerodistoj provoloki [Structural aspects of deformation hardening with repeated drawing low carbon wire]. Lit'e i metallurgiya = Foundry production and metallurgy, 2022, no. 2, pp. 44–49.
6. Gridnev V. N., Gavriluk V. G., Meshkov Ju. Ja. Prochnost’ i plastichnost’ holodnodeformirovannoj stali [Stregth and ductility of cold‑rolled steel]. Kiev, Naukova dumka Publ., 1974, 231 p.
7. Fetisov V. P. Lokalizaciya plasticheskoj deformacii pri deformirovanii nizkouglerodistoj stali [Localization of plastic deformation during the deformation of low‑carbon steel]. Lit'e i metallurgiya = Foundry production and metallurgy, 2022, no. 4, pp. 51–54.
Review
For citations:
Fetisov V.P. The influence of dispersing structure in multiple drawing on the plasticity of low‑carbon steel. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(2):54-56. (In Russ.) https://doi.org/10.21122/1683-6065-2024-2-54-56
Views:
251
Email this article 