Investigation of low temperature effects on the surface of TI–C composite material – textile blend
https://doi.org/10.21122/1683-6065-2024-2-82-87
Abstract
A method for the formation of a composite material is demonstrated, which involves applying titanium to one side of the textile blend 07S11‑KV (produced by OJSC “Mogotex”) and carbon to the other side of the fabric. Tests were conducted on the obtained material in a climatic chamber at temperatures ranging from –20 °C to –40 °C. It is shown that the developed composite material withstands low temperatures well, with no additional deformation of the composite material or structural defects observed. This composite material can be considered as promising for special applications in low‑temperature conditions (antistatic, microwave absorbing, biomedical).
About the Authors
A. G. Anisovich
Institute of Applied Physics of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 16, Academicheskaya str.
Belarus
Minsk, Belarus, 16, Academicheskaya str.
M. I. Markevich
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevicha str.
Belarus
Minsk, Belarus, 10, Kuprevicha str.
I. P. Akula
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevicha str.
Belarus
Minsk, Belarus, 10, Kuprevicha str.
N. M. Chekan
Physical-Technical Institute of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 10, Kuprevicha str.
Belarus
Minsk, Belarus, 10, Kuprevicha str.
E. N. Shcherbakova
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Anisovich A. G., Akula I. P., Zhuravleva V. I., Markevich M. I., Checan N. M. Morfologiya poverhnosti tkani 07S11‑KV posle lazernogo vozdejstviya [Surface morphology of fabric 07S11‑KV after laser exposure]. Kvantovaya elektronika: Materialy 13‑j Mezhdunar. nauch.‑tekhn. konf., 22–26 noyabrya 2021 = Quantum Electronics: Proceedings of the 13th international scientific and technical conference, November 22–26, 2021. Minsk, BGU Publ., 2021, pp. 461–464.
2. Adashkevich S. V., Stel’mah V. F., Bakaev A. G., Gordienko A. I., Markevich M. I., Chaplanov A. M., Shcherbakova E. N. Magnitorezonansnaya diagnostika radiopogloshchayushchih kompozicionnyh materialov [Magnetic resonance diagnostics radioabsorbing composite materials]. Polimernye materialy i tekhnologii = Polymer materials and technologies, 2015, vol. 1, no. 1, pp. 71–75.
3. Kitahara N., Sato T., Isogawa H., Ohgoe Y., Masuko S., Shizuku F., Hirakuri K. K. Antibacterial property of DLC film coated on textile material. Diamond & Related Materials, 2010, vol. 19, pp. 690–694.
4. Akula I. P., Markevich M. I., Stel’mah V. F., Chaplanov A. M., Chekan N. M. Diagnostika magnitorezonansnogo pogloshcheniya energii SVCH amorfnogo ugleroda na podlozhke lavsana [Diagnostics of magnetic resonance absorption of microwave energy of amorphous carbon on a lavsan substrate]. Elektronika‑Info = Electronics‑Info, 2017, no. 1, pp. 55–56.
5. Anisovich A. G., Akula I. P., Markevich M. I., Stel’mah V. F., Chekan N. M. Morfologiya poverhnosti i diagnostika magnitorezonansnogo pogloshcheniya energii SVCH lavsana, modificirovannogo klasterami ugleroda [Surface morphology and diagnostics of magnetic resonance absorption of microwave energy of lavsan modified with carbon clusters]. Prikladnye problemy optiki, informatiki, radiofiziki i fiziki kondensirovannogo sostoyaniya: V Mezhdunar. nauch.‑prakt. konf., 16–17 maya 2019 = Applied problems of optics, computer science, radiophysics and condensed matter physics: V International Scientific and Practical Conference, May 16–17, 2019. Minsk, BGU Publ., 2019, pp. 202–203.
6. Anisovich A. G., Akula I. P., Laskovnev A. P., Markevich M. I., Stel’mah V. F., Chekan N. M. Morfologiya poverhnosti, antistaticheskie i magnitnye svojstva tkani 07S11‑KV [Surface morphology, antistatic and magnetic properties of fabric 07S11‑KV]. Elektronika plyus = Electronics Plus, 2019, no. 4, pp. 51–52.
7. Anisovich A. G., Akula I. P., Zalesskiy V. G., Markevich M. I., Stelmakh V. F., Chekan N. M. Morfologiya poverhnosti, magnitorezonansnye i antistaticheskie svojstva tkani 07S11‑KV s pokrytiem iz nerzhaveyushchej stali [Surface morphology, magnetic resonant and antistatic properties of 07S11‑KV fabric coated with stainless steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2020, no. 1, pp. 87–92.
8. Anisovich A. G., Markevich M. I., Akula I. P., Chekan N. M., Shcherbakova E. N., Kevra E. V. Izmenenie poverhnosti smesovoj tkani 07S11‑KV, modificirovannoj klasterami ugleroda i cirkoniya, pri klimaticheskih ispytaniyah [Changing the surface of the 07S11‑KV mixed fabric modified by carbon and zirconium clusters, during climate tests]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 2, pp. 94–99.
9. Anisovich A. G. Vozmozhnosti ispol’zovaniya temnopol’nogo osveshcheniya dlya analiza nesvyazannyh obektov [Possibilities of application of darkfloor lighting for analysis of unlinked objects]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 1, pp. 116–122.
10. Kukin G. N., Solov’ev A. N. Tekstil’noe materialovedenie (tekstil’nye polotna i izdeliya) [Textile materials science (textile fabrics and products)]. Moscow, Legprombytizdat Publ., 1992, 272 p.
11. Efremov D. E., Tolubeeva G. I. Teoriya perepletenij. Chast’ 1. Glavnye i proizvodnye perepleteniya [Theory of weaving. Part 1. Main and derivative weave]. Ivanovo, Ivanovo State Textile Academy Publ., 2007, 33 p.
Review
For citations:
Anisovich A.G., Markevich M.I., Akula I.P., Chekan N.M., Shcherbakova E.N. Investigation of low temperature effects on the surface of TI–C composite material – textile blend. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(2):82-87. (In Russ.) https://doi.org/10.21122/1683-6065-2024-2-82-87
Views:
224
Email this article 