Research on technological parameters affecting the quality of adhesive joints in casting model assemblies and assessment of their operational properties in liquid and humid environments
https://doi.org/10.21122/1683-6065-2024-2-96-105
Abstract
Modern casting model kits, often created using adhesive technologies, can experience deformations leading to warping and even destruction. This can occur due to differences in thermal expansion and moisture absorption rates between the material and the adhesive. The study evaluated the behavior of the adhesive joint in model kit elements under operational conditions in liquid and humid environments, assessing the hardness and strength of the joint. The analysis revealed a correlation between the density of the plastic and the quality of the adhesive joint.
About the Authors
M. L. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
B. M. Nemenenok
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
References
1. Saranin L. G. [et al.] Izgotovlenie litejnogo model’nogo komplekta s primeneniem stanka‑robota FANUC [Production of a foundry model kit using a FANUC robotic machine]. Izvestiya TulGU. Tekhnicheskie nauki. Vyp. 12. Tekhnologiya mashinostroeniya = News of TulGU. Technical science. Vol. 12. Mechanical engineering technology (ed. V. V. Preuss). Tula, Tula State University Publ., 2018, no. 12, pp. 519–527.
2. Kalinichenko M. L. Sozdanie litejnyh model’nyh komplektov iz othodov proizvodstva s pomoshch’yu tekhnologii skleivaniya [Creation of foundry model kits from production waste using gluing technology]. Sovremennye dostizheniya v oblasti kleev i germetikov: materialy, syr’e, tekhnologii: tezisy dokladov IV Mezhdunar. nauch.‑tekhn. konf. = Modern achievements in the field of adhesives and sealants: materials, raw materials, technologies: abstracts of the IV International scientific‑technical conf. N. Novgorod, 2023, pp. 257–258.
3. Kalinichenko M. L., Dolgiy L. P., Kalinichenko V.A. Tehnologija skleivanija: teorija, praktika, materialy [Bonding technology: theory, practice, materials]. Minsk, BNTU Publ., 2021, 187 p.
4. Sidorova A. V., Malyukov A. V., Gafiyatullin A. H. Issledovanie tekhnologii obrabotki model’nogo plastika s ispol’zovaniem promyshlennyh robotov [Research of model plastic processing technology with the use of industrial robots]. Sovremennye materialy, tekhnika i tekhnologii = Modern materials, equipment and technologies, 2020, no. 6, pp. 61–66.
5. Multicut [Electronic resource]. Available at: https://multicut.ru (access date 13.10.2023).
6. Saranin L. G., Malenko P. I. Issledovanie processov izgotovleniya litejnoj osnastki iz drevesiny i model’nyh plastikov [Study of the processes of manufacturing foundry equipment from wood and model plastics]. Izvestiya TulGU. Tekhnicheskie nauki. Vyp. 10. Tekhnologiya mashinostroeniya = News of TulGU. Technical science. Vol. 10. Mechanical engineering technology (ed. O. I. Boriskin). Tula, Tula State University Publ., 2019, no. 10, pp. 502–507.
7. Freidin A. S. Prochnost’ i dolgovechnost’ kleevyh soedinenij [Strength and durability of adhesive joints]. Moscow, Himiya Publ., 1971, 256 p.
8. Kantieva E. V. [et al.] Natural’noe issledovanie prochnosti skleivaniya massivnoj drevesiny sovremennymi kleyami pri ekspluatacii v razlichnyh usloviyah [Natural study of the bonding strength of solid wood with modern adhesives during operation in various conditions]. Lesotekhnicheskij zhurnal. Vyp. 37. Derevopererabotka. Himicheskie tekhnologii = Forestry Journal. Vol. 37. Wood processing. Chemical technologies, 2020, vol.10, no. 1, pp. 105–115.
9. Villenave J. J. Kleevye soedineniya [Adhesive joints]. Moscow, Technosfera Publ., 2007, 385 p.
10. Pocius A. Klei, adgeziya, tekhnologiya skleivaniya [Adhesives, adhesion, gluing technology]. 3rd ed. St. Petersburg, ProfessiyaPubl., 2016, 384 p.
11. GOST 30535‑97. Polymer adhesives. Nomenclature of indicators. 01.01.2002. Minsk, Interstate Council for Standardization, Metrology and Certification, Belarus. state Institute of Standardization and Certification, 2001, 10 p.
12. GOST 4650‑80. Plastics. Methods for determining water absorption. 01.12.1980. Moscow, State Standard of the USSR, IPK Publishing House of Standards, 1988, 7 p.
13. Shields J. Kleyashchie materialy: sprav. [Adhesive materials: reference book]. Moscow, Maschinostrotnie Publ., 1980, 368 p.
Review
For citations:
Kalinichenko M.L., Nemenenok B.M. Research on technological parameters affecting the quality of adhesive joints in casting model assemblies and assessment of their operational properties in liquid and humid environments. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(2):96-105. (In Russ.) https://doi.org/10.21122/1683-6065-2024-2-96-105
Views:
156
Email this article 