Study of glued elements of model kits under atmospheric conditions and contact with molding mixtures
https://doi.org/10.21122/1683-6065-2024-2-125-133
Abstract
The quality of obtained castings directly depends on the model equipment and the materials used for its production. The properties of elements of model kits, made of plastic and joined using glue technology, are examined. The properties of these joints were evaluated through natural aging under atmospheric conditions. Works were carried out to analyze the influence of abrasive properties of the molding mixture and its components on the quality of glued model kits. Hardness and plasticity tests of the molding mixture were conducted using G. M. Orlov’s sample with both standard and plastic inserts, both integral and glued.
About the Author
M. L. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
Belarus
Minsk, Belarus, 65, Nesavisimosti ave.
References
1. ScienceDirect: Elsevier’s premier platform of peer‑reviewed scholarly literature [Electronic resource]. Available at: https://www.elsevier.com/products/sciencedirect/. (access date 19.03.2024).
2. Kalinichenko M. L., Dolgiy L. P., Kalinichenko V.A. Tehnologija skleivanija: teorija, praktika, materialy [Bonding technology: theory, practice, materials]. Minsk, BNTU Publ., 2021, 187 p.
3. Kalinichenko M. I., Nemenenok B. M. Ocenka prochnostnyh svojstv kleevyh soedinenij, ispol’zuemyh pri sozdanii plastikovyh model’nyh komplektov [Evaluation of the strength properties of adhesive joints used to the creation of plastic model sets]. Lit’e i metallurgiya = Foundry production and metallurgy, 2022, no. 4, pp. 115–122.
4. Kalinichenko M. L. Metodika ispytanij perspektivnyh uzlov model’nyh komplektov dlya nuzhd APK [Methodology for testing promising units of model kits for the needs of the agro‑industrial complex]. Innovacii v prirodoobustrojstve i zashchite v chrezvychajnyh situaciyah: materialy X mezhdun. nauch.‑tekhn. konf., Saratov, 16–17 maya 2023 g. = Innovations in environmental management and protection in emergency situations: materials of the X international scientific and technical. conf., Saratov, May 16–17, 2023. Saratov, Armit Publ., 2023, pp. 552–557.
5. Hi-Cast Co., Ltd. [Electronic resource]. Available at: https://partnora.com/en/company/55c4be61bddd4100a05fba23/Hi-Cast-Co-Ltd (access date 20.04.2023).
6. Zavod AKS [Electronic resource]. Available at: https://www.aksspb.com (access date 20.04.2023).
7. GOST 23409.17–78. Molding mixtures. Method for determining fluidity during static compaction. 01.07.1988. Moscow, State Standard of the USSR, IPK Publishing House of Standards, 1988, 4 p.
Review
For citations:
Kalinichenko M.L. Study of glued elements of model kits under atmospheric conditions and contact with molding mixtures. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(2):125-133. (In Russ.) https://doi.org/10.21122/1683-6065-2024-2-125-133
Views:
177
Email this article 