The influence of structure dispersity on the intensity of hardening during tensile testing of pearlitic steel
https://doi.org/10.21122/1683-6065-2024-3-35-36
Abstract
During uniform and concentrated stretching of thin‑plate pearlite steel, a comparison of the structural dependence of strength and plastic properties, indicators of hardening intensity in the form of the degree of relative strength increase and the rate of deformation hardening, was carried out. Increased structural sensitivity is characteristic of the fracture stress, uniform relative contraction, and the degree of relative strength increase. It is recommended to evaluate the contribution of the deformation hardening intensity to the formation of the ductility of pearlitic steel by the parameters of the relative strength increase.
References
1. Fetisov V. P. Issledovanie lokalizacii plasticheskoj deformacii pri rastyazhenii nizkouglerodistoj stali [Investigation of localization of plastic deformation during stretching of lowcarbon steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 1, pp. 85–87.
2. Fetisov V. P. Formirovanie plasticheskih svojstv pri deformacii rastyazheniem perlitnoj stal [Formation of plastic properties during deformation stretching of pearlitic steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 2, pp. 61–63.
3. Gubkin S. I. Plasticheskaya deformaciya metallov. T. 2 [Plastic deformation of metals. Vol. 2]. Moscow, Metallurgizdat Publ., 1961, 416 p.
4. Fetisov V. P. Deformacionnoe uprochnenie uglerodistoj stali [Strain hardening of carbon steel]. Moscow, Mir Publ., 2005, 200 p.
Review
For citations:
Fetisov V.P. The influence of structure dispersity on the intensity of hardening during tensile testing of pearlitic steel. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(3):35-36. (In Russ.) https://doi.org/10.21122/1683-6065-2024-3-35-36
Views:
201
Email this article 