Advanced tin recycling technology
https://doi.org/10.21122/1683-6065-2024-3-45-50
Abstract
The article gives compositions of tin alloys and tin of the highest and first quality categories. The main impurities in tin, tin babbit and tin‑lead solders are presented. The technique of removing copper from POSM 61M solder for producing POSM 61solder by filtration is described.
About the Authors
B. M. Nemenenok
Belarus National Technical University
Belarus
Belarus National Technical University
Belarus
Belarus National Technical University
V. A. Scheinert
Belarus National Technical University
Belarus
Belarus National Technical University
Belarus
Belarus National Technical University
G. A. Rumiantsava
Belarus National Technical University
Belarus
Belarus National Technical University
Belarus
Belarus National Technical University
I. G. Rakov
Belarus National Technical University
Belarus
Belarus National Technical University
Belarus
Belarus National Technical University
References
1. Kurdyumov A. V., Pikunov M. V., Chursin V. M. et. al. Proizvodstvo otlivok iz splavov cvetnyh metallov [Production of casting from non-ferrous metal alloys]. Moscow, MISIS Publ., 1996. 504 p.
2. Nemenenok B. M., Downar G. V., Slutsky A. G. et. al. Kompleksnaja pererabotka olovjanno-svincovoj izgari v pripoi i ligatury [Complex processing of tin-lead dross into solders and ligatures]. Lit’e i metallurgiya = Foundry production and metallurgy, 2020, no. 1, pp. 93–98.
Review
For citations:
Nemenenok B.M., Scheinert V.A., Rumiantsava G.A., Rakov I.G. Advanced tin recycling technology. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(3):45-50. (In Russ.) https://doi.org/10.21122/1683-6065-2024-3-45-50
Views:
134
Email this article 