Investigation of the intensity of strain hardening of low‑carbon steel.
https://doi.org/10.21122/1683-6065-2024-4-64-67
Abstract
The influence of the deformation scheme under uniform and concentrated tension, compression and drawing on the intensity of strain hardening of low‑carbon steel with different dispersion of the structure is considered. With an increase in the grain size of ferrite, the tendency to hardening increases for all deformation schemes. Compression reduces the structural sensitivity of the intensity of strain hardening. Uniform tension enhances the intensity of hardening compared to drawing and concentrated tension, but is inferior to uniaxial compression. The breakthrough of dislocation accumulations through the subsurface layers of the wire of the stronger surface layer formed during drawing is accompanied by an increase in the density of mobile dislocations and a decrease in the intensity of strain hardening.
References
1. Fetisov V. P. Deformacionnoe uprochnenie uglerodistoj stali [Carbon steel strain hardening]. Moscow, Mir Publ., 2005, 200 p.
2. Fetisov V. P. Vlijanie dispergirovanija struktury pri mnogokratnom volochenii na plastichnost’ nizkouglerodistoj stali [The influence of dispersing structure in multiple drawing on the plasticity of lowcarbon steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2024, no. 2, pp. 54–56.
3. Wigley D.A. Mekhanicheskie svojstva materialov pri nizkih temperaturah [Mechanical properties of materials at low temperatures]. Moscow, Mir Publ., 1974, 374 p.
4. Fetisov V. P. Vlijanie dispersnosti struktury na intensivnost’ uprochnenija pri rastjazhenii perlitnoj stali [The influence of structure dispersity on the intensity of hardening during tensile testing of pearlitic steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2024, no. 3, pp. 35–36.
5. Precht W. Bulletin de Lacademie pelonaise des sciences, 1966, vol. XIV, no. 2.
6. Morrison W. B., Miller R. L. Plastichnost’ splavov so sverhmelkim zernom [Plasticity of alloys with ultra‑fine grains]. Sverhmelkoe zerno v metallah = Ultrafine grain in metals. Moscow, Metallurgija Publ., 1973, pp. 181–205.
7. Severdenko V. P., Kalachev M. I., Sevastyanov E. S. Ob izmenenii harakteristik prochnosti i razmera blokov mozaiki armkozheleza pri nizkih temperaturah [On the change in the strength characteristics and size of armco‑iron mosaic blocks at low temperatures]. Plasticheskaya deformaciya i obrabotka metallov davleniem = Plastic deformation and metal forming. Minsk, Nauka i tekhnika Publ., 1969, pp. 58–62.
8. Fetisov V. P. Strukturnye aspekty deformacionnogo uprochnenija pri mnogokratnom volochenii nizkouglerodistoj provoloki [Structural aspects of deformation hardening with repeated drawing low carbon wire]. Lit’e i metallurgiya = Foundry production and metallurgy, 2022, no. 2, pp. 44–49.
9. Fetisov V. P. Deformacionnoe starenie stali pri volochenii provoloki [Deformational aging of steel during wire drawing]. Minsk, Belorgstankinpromizdat Publ., 1996, 120 p.
10. Morrison W. B. The effect of grain size on the stress‑strain relationship in low‑carbon steel. Trans. ASM, 1966, vol. 59, pp. 824–845.
11. Fetisov V. P. Lokalizacija plasticheskoj deformacii pri deformirovanii nizkouglerodistoj stali [Localization of plastic deformation during deformation of lowcarbon steel]. Lit’e i metallurgiya = Foundry production and metallurgy, 2022, no. 4, pp. 51–54.
12. Babich V. K., Gul’ Yu. P., Dolzhenkov I. E. Deformacionnoe starenie stali [Deformation aging of steel]. Moscow, Metallurgiya Publ., 1972, 320 p.
13. Precht W. Electron Microscopy, 1966, vol. 1, 645 p.
14. Fridel’ Zh. Dislokacii [Dislocations]. Moscow, Mir Publ., 1967, 643 p.
15. Fetisov V. P. Tehnologicheskie trebovanija k volochil’nomu oborudovaniju dlja proizvodstva provoloki iz uglerodistoj stali [Technological requirements for drawing equipment for the production of carbon steel wire]. Stal’ = Steel, 2008, no. 9, pp. 64–68.
Review
For citations:
Fetisov V.P. Investigation of the intensity of strain hardening of low‑carbon steel. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2024;(4):64-67. (In Russ.) https://doi.org/10.21122/1683-6065-2024-4-64-67
Views:
155
Email this article 