Usagt study of creating model kits parts with the help of porous materials, including foundry waste
https://doi.org/10.21122/1683-6065-2025-1-47-53
Abstract
The paper considers current approaches to creating model kits parts for small-scale and individual production based on aluminum alloy waste. The aim of this study was to examine the prospects for using foundry waste of aluminum alloys and highly porous materials, in order to minimize the cost of manufacturing a model kit, as well as to develop recommendations for closing the pores of highly porous materials.
About the Authors
M. L. Kalinichenko
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave.
V. A. Kalinichenko
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave.
A. A. Andrushevich
Belarusian State Agrarian Technical University
Belarus
Belarus
Minsk, Belarus, 99/2, Nezavisimosti Ave.
References
1. Kreschik A.A., Sukhorukov D. V., Kechin V. A. Tekhnologiya prigotovleniya materiala s ispol’zovaniem poliuretanovyh othodov dlya proizvodstva model’noj osnastki [Technology of material preparation using polyurethane waste for the production of model equipment]. Litejshchik Rossii = Russian Foundryman, 2021, no. 12, pp. 21–25.
2. Kreschik A. A., Kechin V. A. Tekhnologiya izgotovleniya model’no‑sterzhnevoj osnastki s ispol’zovaniem polimernyh othodov sobstvennogo proizvodstva [Technologies for manufacturing model‑rod tooling using polymer waste of own production]. Litejshchik Rossii = Russian Foundryman, 2023, no. 4, pp. 29–33.
3. Tribushevskiy L. V., Nemenenok B. M., Rumyantseva G. A., Rimoshevskiy V. S. Analiz processa plavki alyuminievoj struzhki i shlaka v korotkoplamennoj rotornoj pechi [The analysis of process of melting of aluminium shaving and slag in the short‑flame rotor furnace]. Lit’e i metallurgiya = Foundry production and metallurgy, 2015, no. 2, pp. 42–48.
4. Kalinichenko M. L., Kalinichenko V. A. Sozdanie model’nyh komplektov iz othodov alyuminievogo proizvodstva pri pomoshchi additivnyh tekhnologij skleivaniya i poslojnogo naneseniya produkta [Creation of model kits from aluminum production waste using additive technologies for gluing and layer‑by‑layer application of the product]. Sb. dokl. Mezhdunar. nauch.-prakt. simp. = Collection. report Intl. scientific-practical symp. (Minsk, September 25, 2024). Minsk, Belaruskaya navuka Publ., 2024, pp. 122–132.
5. Kalinichenko M. L., Dolgiy L. P., Kalinichenko V. A. Tekhnologiya skleivaniya: teoriya, praktika, materialy [Bonding technology: theory, practice, materials]. Minsk, BNTU Publ., 2021, 187 p.
6. Kalinichenko M. L. Innovacionnoe reshenie krepleniya cel’nometallicheskih i poristyh tel s pomoshch’yu skleivaniya [Innovative solution for fastening all‑metal and porous bodies using gluing]. Vesnik Grodz. dzyarzh. univ. imya Yanki Kupaly. Seryya 6. Tekhnika = Vesnik of Yanka Kupala State University of Grodno. Vol. 6. Technology, 2019, vol. 9, no. 2, pp. 13–26.
7. Kalinichenko M. L., Nemenenok B. M. Model’nye komplekty na osnove vspenennyh materialov [Model kits based on foam materials]. Intellektual’nyj potencial Minskoj oblasti: mekhanizmy i instrumenty rosta: materialy nauch.-prakt. konf. uchenyh, uchashchihsya i specialistov predpriyatij = Intellectual potential of the Minsk region: mechanisms and tools of growth: materials of scientific and practical work. conf. scientists, students and enterprise specialists, November 24, 2022. Zhodino, 2022, pp. 34–36.
8. Kalinichenko M. L. Metodika vizual’noj ocenki kleevogo shva na primere soedineniya elementov model’nyh komplektov, sozdannyh iz othodov proizvodstva [Methodology for visual assessment of an adhesive joint using the example of connecting elements of model kits created from industrial waste]. Innovacii v prirodoobustrojstve i zashchite v chrezvychajnyh situaciyah: materialy X mezhdunar. nauch.-tekhn. konf. = Innovations in environmental management and protection in emergency situations: materials of the X International. scientific-technical Conf., Saratov, May 16–17, 2023. Saratov, Armit Publ., 2023, pp. 546–551.
9. Kalinichenko M. L. Sozdanie litejnyh model’nyh komplektov iz othodov proizvodstva s pomoshch’yu tekhnologii skleivaniya [Creation of foundry model kits from production waste using gluing technology]. Sovremennye dostizheniya v oblasti kleev i germetikov: materialy, syr’e, tekhnologii: tezisy dokladov IV Mezhdunar. nauch.-tekhn. konf. = Modern achievements in the field of adhesives and sealants: materials, raw materials, technologies: abstracts of the IV International. scientific-technical conf. N. Novgorod, 2023, pp. 257–258.
10. Kalinichenko M. L. Sozdanie litejnyh model’nyh komplektov na osnove poristyh penoobraznyh alyuminievyh shlakov [Creation of foundry model kits based on porous foam‑like aluminum slags]. Innovacionnye tekhnologii v agropromyshlennom komplekse – segodnya i zavtra: materialy 7 Mezhdunar. nauch.-prakt. konf.: v 2 ch. = Innovative technologies in the agro-industrial complex – today and tomorrow: materials of the 7th International. scientific-practical Conf., Gomel, November 17, 2023: 2 parts. Gomel, 2023, part 2, pp. 16–20.
11. PVS – Energoplus [Electronic resource]. Available at: https://pvs.by/1386/1663/1678/ (accessed 10.12.2023).
12. Kalinichenko M. L., Nemenenok B. M. Ocenka mehanicheskih svojstv skleennyh jelementov dlja model’nyh komplektov [Evaluation of mechanical properties of glued elements for model kits]. Lit’e i metallurgija = Foundry production, 2023, no. 2, pp. 100–106.
13. FormX Webshop [Electronic resource]. Available at: www.formx.eu/ (accessed 12.12.2024).
14. Antichita Belsito [Electronic resource]. Available at: https://www.antichitabelsito.it/schede/Resina_Poliuretanica_Axson_F40.pdf/ (accessed 12.12.2024).
Review
For citations:
Kalinichenko M.L., Kalinichenko V.A., Andrushevich A.A. Usagt study of creating model kits parts with the help of porous materials, including foundry waste. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(1):47-53. (In Russ.) https://doi.org/10.21122/1683-6065-2025-1-47-53
Views:
737
Email this article 