Study of shrinkage processes in the mold during casting of continuously cast round billet with diameter of 200 mm
https://doi.org/10.21122/1683-6065-2025-3-50-55
Abstract
The study investigates the influence of shrinkage processes in the mold of a continuous casting machine on the formation of surface defects during the casting of a 200 mm diameter round billet. The necessary shrinkage criteria for the continuously cast billet were determined to form an optimal shell by selecting molds with a specific geometric configuration and by using slag‑forming mixtures of customized chemical composition.
About the Author
I. O. Pisarenko
Management Company of "BMC" Holding"
Belarus
Belarus
Zhlobin,
37, Promyshlennaya str.
References
1. Pravosudovich V. V. [et al.] Defekty stal’nyh slitkov i prokata: sprav. izd. [Defects of steel ingots and rolled products: reference publication]. Moscow, Intermet Engineering Publ., 2006, 41 p.
2. Kozyrev N.A., Gizatulin R.A., Valuev D. V. Nepreryvnaya razlivka stali i splavov: ucheb. posobie [Continuous casting of steel and alloys: a tutorial]. Tomsk, Publishing house of Tomsk Polytechnic University, 2011, pp. 313–315.
3. Ogurtsov A. P. Nepreryvnaya razlivka stali: ucheb. posobie [Continuous casting of steel: a tutorial]. Kyiv, Naukova dumka, 2001, 47 p.
4. Smirnov A. N. [et al.] Nepreryvnaya razlivka sortovoj zagotovki [Continuous casting of billets]. Doneck, Cifrovaya tipografiya Publ., 2012, 139 p.
5. Smirnov A. N., Kubersky S. V., Shtepan E. V. Nepreryvnaya razlivka stali: uchebnik [Continuous casting of steel: textbook]. Doneck, DonNTU, 2011, 161 p.
Review
For citations:
Pisarenko I.O. Study of shrinkage processes in the mold during casting of continuously cast round billet with diameter of 200 mm. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(3):50-55. (In Russ.) https://doi.org/10.21122/1683-6065-2025-3-50-55
Views:
16
Email this article 