Assessment of the working conditions of the mold assembly worker in foundries
https://doi.org/10.21122/1683-6065-2025-3-129-134
Abstract
The results of the assessment of working conditions at the workplaces of the mold collector are presented, the factors of the production environment determining them are determined. The working conditions of the mold assembly worker are considered in comparison with the standard values. It has been established that when assessing the working conditions of an assembler in foundries, it is necessary to take into account the equipment and hand tools used, and the duration of stay at the working equipment
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Belarus
Minsk,
65, Nezavisimosti ave.
I. A. Ivanov
Belarusian National Technical University
Belarus
Belarus
Minsk,
65, Nezavisimosti ave
M. А. Sadokha
Belarusian National Technical University
Belarus
Belarus
Minsk,
65, Nezavisimosti ave
References
1. Lazarenkov A. M. Klassifikaciya proizvodstvennyh faktorov litejnogo proizvodstva [Classification of production factors of foundry production]. Lit’e i metallurgiya = Foundry production and metallurgy, 2021, no. 3, pp. 118–122.
2. Lazarenkov A. M., Khoreva S.A. Analiz proizvodstvennyh faktorov litejnyh cekhov [Analysis of production factors of foundries]. Litejnoe proizvodstvo i metallurgiya 2016, Belarus’: trudy 24‑j Mezhdunar. nauch.‑tekhn. konf. = Foundry production and metallurgy 2016, Belarus: proceedings of the 24th Int. scientific and technical. conf. Minsk, 2016, pp. 117–120.
3. Lazarenkov A. M., Horeva S.A. Klassifikaciya rabochih mest litejnogo proizvodstva po usloviyam truda [Classification of working places of foundry production by working conditions]. Lit’e i metallurgiya = Foundry production and metallurgy, 2009, no. 3, pp. 92–98.
4. Lazarenkov A. M. Issledovanie vliyaniya uslovij truda na rabotayushchih v litejnyh cekh [Research of influence of working conditions on workers in foundries]. Lit’e i metallurgiya = Foundry production and metallurgy, 2019, no. 2, pp. 134–137.
5. Lazarenkov A. M., Ivanov I.A., Sadokha M.A., Novik A.A. Analiz i prognozirovanie vliyaniya uslovij truda na professional’nuyu zabolevaemost’ v litejnyh cekhah [Analysis and forecasting of the impact of working conditions on occupational diseases in foundry workers]. Lit’e i metallurgiya = Foundry production and metallurgy, 2024, no. 4, pp. 130–134.
6. Lazarenkov A. M. Issledovanie vliyaniya uslovij truda na obshchuyu zabolevaemost’ litejshchikov [Research of influence of working conditions on the general incidence of foundrymen]. Lit’e i metallurgiya = Foundry production and metallurgy, 2019, no. 3, pp. 156–159.
7. Sanitarnye normy, pravila i gigienicheskij normativ «Gigienicheskaya klassifikaciya uslovij truda»: utv. post. Min. zdravoohraneniya Resp. Belarus’ ot 28.12.2012 № 211, s izm. ot 30.06.2014 № 51 [Sanitary norms, rules and hygienic standard “Hygienic classification of working conditions”: approved. Resolution Ministry of Health of the Republic of Belarus dated 28.12.2012 no. 211, as amended on 30.06.2014 no. 51].
8. Lazarenkov A. M., Sadokha M.A. Issledovanie shumovogo faktora uslovij truda v litejnom proizvodstve [Research of the working conditions noise factor in the foundry production]. Lit’e i metallurgiya = Foundry production and metallurgy, 2022, no. 2, pp. 130–136.
9. Lazarenkov A. M., Sadokha M.A. Issledovanie vibrobezopasnosti truda v litejnom proizvodstve [Research of vibration safety of labor in foundry production]. Litejnoe proizvodstvo = Foundry production, 2022, no. 5, pp. 30–35.
10. Lazarenkov A. M., Sadokha M.A., Kot T. P., Novik A.A. Issledovanie uslovij truda po pylevomu faktoru v litejnyh cekhah s razlichnym harakterom proizvodstva [Study of working conditions by dust factor in foundries with different production patterns]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 1, pp. 135–137.
11. Lasarenkov A. M. Issledovanie vozduha rabochih zon litejnyh cekhov [A study of the air quality of working areas in foundries]. Lit’e i metallurgiya = Foundry production and metallurgy, 2019, no. 2, pp. 138–132.
12. Lazarenkov A. M., Sadokha M.A. Issledovanie vozdushnoj sredy rabochih zon litejnyh cekhov pri sovremennyh tekhnologiyah izgotovleniya sterzhnej i form [Study of the air environment of working areas of foundries using modern technologies for manufacturing cores and molds]. Litejshchik Rossii = Foundryman of Russia, 2022, no. 93, pp. 29–32.
13. Lazarenkov A. M., Khoreva S.A. Ocenka parametrov mikroklimata rabochih mest litejnyh cekhov [Assessment of microclimate parameters of workplaces in foundry shops]. Litejnoe proizvodstvo i metallurgiya 2017, Belarus’: trudy 25‑j Mezhdunar. nauch.‑ tekhn. konf. = Foundry production and metallurgy 2017, Belarus: proceedings of the 25th Int. scientific and technical. conf. Minsk, 2017, pp. 216–218.
14. Lazarenkov A. M., Sadokha M.A. Usloviya truda rabotayushchih na formovochnyh uchastkah litejnyh cekhov [Employees’ working conditions on molding areas of foundry shops]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 4, pp. 109–116.
15. Lazarenkov A. M. Ocenka uslovij truda rabotayushchih v litejnyh cekhah s massovym harakterom proizvodstva [Assessment of working conditions in foundries with the mass production]. Lit’e i metallurgiya = Foundry production and metallurgy, 2017, no. 4, pp. 134–137.
Review
For citations:
Lazarenkov A.M., Ivanov I.A., Sadokha M.А. Assessment of the working conditions of the mold assembly worker in foundries. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(3):129-134. (In Russ.) https://doi.org/10.21122/1683-6065-2025-3-129-134
Views:
15
Email this article 