Prospects for using high‑alloy austenitic steel powder produced by reactive mechanical alloying for the production of products by selective laser melting
https://doi.org/10.21122/1683-6065-2025-4-73-81
Abstract
The results of scientific research aimed at studying the influence of reaction mechanical alloying conditions on the characteristics of synthesized austenitic steel powder are presented. Conditions ensuring the production of material with a reasonable fraction content of 25–50 µm are determined. The influence of selective laser melting process parameters on the structure and hardness of the synthesized products is studied. The phase composition of the material is determined.
About the Authors
A. S. Fedosenko
Belarusian‑Russian University
Belarus
Belarus
Mogilev,
Belarus,
43, Mira ave.
E‑mail: strannik@tut.by,
tel. +375‑29‑546‑96‑34
A. S. Olientsevich
Belarusian‑Russian University
Belarus
Belarus
Mogilev,
Belarus,
43, Mira ave.
References
1. Saprykin A.A. [et al.] Forming a single layer of a composite powder based on the Ti‑Nb system via selective laser melting (SLM). IOP Conf. Series: Materials Science and Engineering, 2016, no. 140, pp. 1–9.
2. Wimler D. [et al.] Designing advanced intermetallic titanium aluminide alloys for additive manufacturing. Intermetallics, 2021, vol. 131, art. 107109
3. Soliman H.A., Elbestawi M. Titanium aluminides processing by additive manufacturing – a review. International Journal of Advanced Manufacturing Technology, 2022, vol. 119, pp. 5583–5614.
4. DebRoy T. Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 2018, vol. 92, pp. 112–224.
5. Lovshenko F. G., Fedosenko A. S. Mehanicheski legirovannye zharoprochnye poroshki dlja proizvodstva izdelij additivnymi tehnologijami: monogr. [Mechanically alloyed heat‑resistant powders for the production of products using additive technologies]. Mogilev, Belorus.‑Ros. un‑t Publ., 2019, 405 p.
6. Lovshenko G. F., Lovshenko F. G., Khina B. B. Nanostrukturnyye mekhanicheski legirovannyye materialy na osnove metallov: monogr. [Nanostructured mechanically alloyed materials based on metal]. Mogilev, Belorus.‑Ros. un‑t Publ., 2008, 679 p.
7. Lovshenko G. F., Lovshenko Z. M., Khabibullin A. I. Vysokoeffektivnyy apparat dlya reaktsionnogo mekhanicheskogo legirovaniya metallicheskikh sistem [Highly efficient apparatus for reaction mechanical alloying of metal systems]. Vestnik Belorussko‑ Rossiyskogo universiteta = Bulletin of the Belarusian‑Russian University, 2007, no. 4, pp. 72–80.
8. Lovshenko F. G., Fedosenko A. S., Lovshenko G. F. Vliyaniye mekhanicheskogo legirovaniya na fazovyy sostav i teplosoderzhaniye termoreagiruyushchikh poroshkovykh kompozitsiy na osnove zheleza i nikelya dlya gazotermicheskikh pokrytiy [Influence of mechanical alloying on phase composition and heat content of thermoreacting powder compositions on the basis of iron and nickel for gas‑thermal coverings]. Lit’ye i metallurgiya = Foundry production and metallurgy, 2014, no. 4, pp. 99–108.
Review
For citations:
Fedosenko A.S., Olientsevich A.S. Prospects for using high‑alloy austenitic steel powder produced by reactive mechanical alloying for the production of products by selective laser melting. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(4):73-81. (In Russ.) https://doi.org/10.21122/1683-6065-2025-4-73-81
Views:
114
JATS XML
Email this article 