Assessing the nature and dynamics of failure of glue‑bound joints in a model kit using numerical simulation tools
https://doi.org/10.21122/1683-6065-2025-4-82-92
Abstract
This paper presents computer modeling using various programs, capable of simulating technological processes, and potential loads experienced by model kits based on solid and hollow glued and solid elements. The process of compaction of molding mixtures during machine and manual molding was simulated with a visual demonstration of the loads acting on the model kit. The advantages and disadvantages of the programs used in the Eurasian Economic Community are discussed. The feasibility of using these programs to assess loads on solid and glued components is substantiated.
About the Authors
М. Л. Kalinichenko
Belarusian National Technical University
Belarus
Belarus
Minsk,
Belarus,
65, Nezavisimosty ave.
E‑mail: m.kalinichenko@bntu.by
E. A. Malinovskii
Belarusian National Technical University
Belarus
Belarus
Minsk,
Belarus,
65, Nezavisimosty ave.
M. L. Pshanichny
Belarusian National Technical University
Belarus
Belarus
Minsk,
Belarus,
65, Nezavisimosty ave.
E. N. Shish
Belarusian National Technical University
Belarus
Belarus
Minsk,
Belarus,
65, Nezavisimosty ave.
References
1. Nikanorov A. V. Sravnitel’nyj analiz komp’juternyh programm dlja modelirovanija litejnyh processov [Comparative Analysis of Computer Programs for Modeling Casting Processes]. Vestnik IrGT U. Metallurgija i materialovedenie = Irkutsk State Technical University Bulletin. Metallurgy and Materials Science, 2018, no. 11, pp. 209–218.
2. Monastyrskij A. V., Vlasov Ju. PoligonSoft dlja litejnogo proizvodstva [PoligonSoft for Foundries]. SAPR i grafika = CAD and Graphics, 2022, no. 5, pp. 22–28.
3. Kovalev R. V., Danilenko D. V. Vvedenie v modelirovanie dinamiki mehanicheskih sistem [Introduction to Modeling the Dynamics of Mechanical Systems]. SAPR i grafika = CAD and Graphics, 2008, no. 4, p. 26–31.
4. Optimizaciya lit’evyh processov s pomoshch’yu programmnogo obespecheniya [Optimization of casting processes using software]. Access mode: http://www.rosstip.ru (accessed 15.10.2024).
5. Kalinichenko M. L., Dolgij L. P., Kalinichenko V.A. Tehnologija skleivanija: teorija, praktika, materialy [Bonding technology: theory, practice, materials]. Minsk, BNTU Publ., 2021, 187 p.
6. Churkin B. S. Tehnologija litejnogo proizvodstva [Foundry technology]. Ekaterinburg, Izd‑vo Ural. gos. prof.‑ped. un‑ta Publ., 2000, 662 p.
7. Kalinichenko M. L. Komp’juternoe modelirovanie tehnologicheskih processov litejnogo proizvodstva [Computer Modeling of Foundry Processes]. Razvitie sovremennoj nauki: opyt, problemy, prognozy: sb. st. IX Mezhdunar. nauch.‑prakt. konf. = Development of Modern Science: Experience, Problems, Forecasts: Collection of Articles from the IX International Scientific and Practical Conference. Petrozavodsk, Novaja nauka Publ., 2025, pp. 85–101.
8. SolidWorks. Obzor vozmozhnostej 3D modelirovaniya [SolidWorks. Overview of 3D modeling capabilities]. Access mode: https://www.solidworks.com/ru (accessed 15.10.2025).
9. Osnovnye principy SolidWorks Simulation [Basic Principles of SolidWorks Simulation]. Access mode: https://help.solidworks.com (accessed 15.10.2025).
10. ASCON. Opisanie vozmozhnostej sistemy Kompas‑3D: funkcii, tekhnicheskie harakteristiki i usloviya licenzirovaniya [ASCON. Description of the capabilities of the Kompas‑3D system: functions, technical characteristics, and licensing terms]. Access mode: https://ascon.net/products (accessed 16.10.2025).
Review
For citations:
Kalinichenko М.Л., Malinovskii E.A., Pshanichny M.L., Shish E.N. Assessing the nature and dynamics of failure of glue‑bound joints in a model kit using numerical simulation tools. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(4):82-92. (In Russ.) https://doi.org/10.21122/1683-6065-2025-4-82-92
Views:
108
JATS XML
Email this article 