Metallographic structure of the tape after two‑roll hardening‑rolling of the melt
https://doi.org/10.21122/1683-6065-2026-1-81-86
Abstract
The paper presents a description of an installation for two-roll rapid hardening-rolling of the melt in rolls with an ultra-thin bandage. It is shown that the main processes of deformation of the tape occur in the melt bath located in the inter-roll space. A feature of the crystalline structure of thin tapes made of the alloy is the zonal nature, when the crystals have a special location, shape and size. The dependences of the influence of the annealing temperature of rapidly quenched tapes of different thickness on the average grain size and its microhardness are presented.
About the Authors
M. N. Vereshchagin
Gomel State Technical University named after P. O. Sukhoi
Belarus
Belarus
48, Oktyabrya ave.
Gomel
N. M. Zapuskalov
Central Research Institute of Ferrous Metallurgy named after I. P. Bardin
Russian Federation
Russian Federation
Moscow
S. I. Kirilyuk
Gomel State Technical University named after P. O. Sukhoi
Belarus
Belarus
48, Oktyabrya ave.
Gomel
kirilik@gstu.by
References
1. Yoou J. C. [et al.] // METEC Congress 94: 2nd European Continuous Conference: 6th International Rolling Conference, 1994, pp. 435–442.
2. Wirgman S. L., Millett M. D. // Scanijot VI: 6th International Conference on Refining Progresses, 1992, pp. 1–17.
3. Molotilov B. V. [et al.] Sera v elektricheskih stalyah [Sulfur in electrical steels]. Moscow, Metallurgiya Publ., 1973, 176 p.
4. Polischuk V. E., Selensky Ya. P. Vysokotemperaturnye issledovaniya splava sistemy Fe – Si – Al [High‑temperature studies of the Fe–Si–Al alloy system]. Ukrainskij fizicheskij zhurnal = Ukrainian Physical Journal, 1969, iss. 10.
5. Chang Y.A. Electron mieroscope investingation of order‑disorder transformation in Fe – Si – Al alloy and its dislocation configuration. Acta. Met., 1982, vol. 30, pp. 1185–1192.
6. Vereshchagin M. N. Sposob polucheniya metallicheskih volokon: patent RU № 2099163, S1, Kl. B22D, 11.06.1992 [Method for producing metal fibers]. Published 20.12.1997.
7. Vereshchagin M. N., Serebryansky G.A., Kholomeev A. V. Ustrojstvo dlya podachi rasplava pri dvuhvalkovoj zakalke rasplava: patent SU № 1788658, A1, Kl. B22D, 11.06.1990 [Device for feeding melt during two‑roll melt quenching]. Published 06.05.1994.
8. Vereshchagin M. N. Analiz processa zatverdevaniya metalla pri dvuhvalkovoj zakalke rasplava [Analysis of the process of metal solidification during two‑roll melt quenching]. Vesci Nac. akad. navuk Belarusі. Ser. fiz.-tekhn. navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-Technical series, 1994, no. 2, рр. 47–52.
9. Vereshchagin M. N., Zapuskalov N. M. Formirovanie geometrii lenty pri dvuhvalkovoj zakalke rasplava [Formation of tape geometry during two‑roll melt quenching]. Vesci Nac. akad. navuk Belarusі. Ser. fiz.-tekhn. navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-Technical series, 1995, no. 3, рр. 36–41.
10. Belov V. K. [et al.] Formirovanie mikrogeometrii poverhnosti lenty [Formation of microgeometry of the surface of a kinescope tape]. Stal’ = Steel, 1989, no. 7, pp. 554–560.
11. Molotilov B. V., Zapuskalov N. M. Izuchenie strukturoobrazovaniya pri dvuhvalkovom metode bystroj zakalki [Study of structure formation during two‑roll rapid hardening method]. Stal’ = Steel, 1992, no. 3, pp. 75–78.
12. Glezer A. M. [et al.] Strukturnye osobennosti splava, poluchennogo zakalkoj iz rasplava [Structural features of an alloy obtained by quenching from a melt]. Fizika Metallov i Metallovedenie = Physics of Metals and Metal Science, 1983, iss. 4, pp. 750–757.
13. Vereshchagin M. N., Serebryansky G.A., Kokhanovsky O. T. Dvuhvalkovaya prokatka rasplava – effektivnyj metod proizvodstva lenty s amorfnoj i mikrokristallicheskoj strukturoj [Two‑roll rolling of the melt – an effective method for producing tape with an amorphous and microcrystalline structure]. Aktual’nye problemy plasticheskoj deformacii metallov = Actual problems of plastic deformation of metals. Varna, 1990, pp. 44–45.
14. Vereshchagin M. N., Zapuskalov N. M., Agunovich I. V. [et al.] Dvuhvalkovaya bystraya zakalka rasplava [Two‑roll rapid quenching of melt]. Gomel, Sukhoi State Technical University of Gomel Publ., 2019, 298 p.
15. Zapuskalov N. M., Vereshchagin M. N. Wear of Roll Surface in Twin‑ roll Casting of 4,5 % Si Stell Strip. ISIJ International, 2000, vol. 40, no. 6, p. 589–596.
16. Zapuskalov N. M., Vereshchagin M. N. Effect of Technological Factors on strip Profil in Twin Casting Process. ISIJ International, 1998, vol. 40, no. 10, pp. 1007–1113.
Review
For citations:
Vereshchagin M.N., Zapuskalov N.M., Kirilyuk S.I. Metallographic structure of the tape after two‑roll hardening‑rolling of the melt. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2026;(1):81-86. (In Russ.) https://doi.org/10.21122/1683-6065-2026-1-81-86
Views:
120
JATS XML
Email this article 