NUMERICAL MODELING OF PROCESS OF THE CAST IRON FLOW IN GATING SYSTEM AND MOLD AT CASTING PRODUCTION BY VACUUM AND FILM METHOD
Abstract
Purpose of the article is modeling of process of cast iron flowing in the gating systems used in vacuum-film molds. On the basis of the received results it is possible to deduce on great opportunities of the developed method of choice the gating systems used at production of castings by vacuum-film method.
About the Authors
S. G. Likhouzov
Belarusian National Technical University
Belarus
Belarus
A. N. Chichko
Belarusian National Technical University
Belarus
Belarus
V. F. Sobolev
Belarusian National Technical University
Belarus
Belarus
Yu. V. Yatskevich
Belarusian National Technical University
Belarus
Belarus
T. V. Matyushinets
Belarusian National Technical University
Belarus
Belarus
O. A. Sachek
Belarusian National Technical University
Belarus
Belarus
O. I. Chichko
Belarusian National Technical University
Belarus
Belarus
References
1. Компьютерное моделирование характеристик течения расплава чугуна для отливок, изготавливаемых методом вакуумнопленочной формовки / А. Н. Чичко [и др.] // Литье и металлургия. 2013. № 1. С. 77–82.
2. Компьютерное исследование влияния изменения теплопроводности вакуумно-пленочной формы на характеристики технологии изготовления отливки / А. Н. Чичко [и др.] // Литье и металлургия. 2013. № 2. С. 56–61.
Review
For citations:
Likhouzov S.G., Chichko A.N., Sobolev V.F., Yatskevich Yu.V., Matyushinets T.V., Sachek O.A., Chichko O.I. NUMERICAL MODELING OF PROCESS OF THE CAST IRON FLOW IN GATING SYSTEM AND MOLD AT CASTING PRODUCTION BY VACUUM AND FILM METHOD. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2014;(4):58-62. (In Russ.)
Views:
496
Email this article 