PRODUCTION OF POROUS POWDER MATERIALS OF SPHERICAL POWDERS OF CORROSION-RESISTANT STEEL
https://doi.org/10.21122/1683-6065-2012-3-98-105
Abstract
Production of porous powder materials from spherical powders of corrosion-resistant steel 12Х18н10Т with formation at low pressures 120–140 mpa in the mold with the subsequent activated sintering became possible due to increase of duration of process of spattering and formation of condensate particles (Si–C) or (Mo–Si) on surface.
About the Authors
V. N. Kovalevskij
Belarusian National Technical University
Belarus
Belarus
L. P. Pilincnich
Belarusian State University of Informatics and Radioelectronics
Belarus
Belarus
A. V. Kovalevskaya
Belarusian National Technical University
Belarus
Belarus
V. V. Savich
Powder Metallurgy Institute of the NAS of Belarus
Belarus
Belarus
I. V. Fomihina
Powder Metallurgy Institute of the NAS of Belarus
Belarus
Belarus
S. V. Grigorjev
Belarusian National Technical University
Belarus
Belarus
A. E. Zhuk
Belarusian National Technical University
Belarus
Belarus
References
1. G ordeev S. K. Advanced diamond based composites for engineering applications// in Diamond Based Composites, Kluwer, Dordrecht, 1997. P. 1–11.
2. Физические свойства алмаза: Справ. Киев: Наукова думка, 1987.
3. Гнесин Г. Г. Исследования и разработка неоксидных керамических материалов в Украине // Новые материалы и технологии. Киев: Наукова думка, 1998. С. 519–528.
4. Ковалевский В. Н., Гордеев С. К., К орчагина С. Б., Фомихина И. В., Жук А. Е. Структурообразование карбидокремниевой матрицы в композиции алмаз–карбид кремния // Огнеупоры и техническая керамика. 2005. № 5. С. 8–14.
5. Клопов С. Г., Лесневский Л. Н., Тюрин В. Н., Ушаков А. М. Моделирование и расчет параметров электрического разряда в планарном магнетроне // Изв. РАН. Сер. физическая. 2006. Т. 70. № 8. С. 1204–1209.
Review
For citations:
Kovalevskij V.N., Pilincnich L.P., Kovalevskaya A.V., Savich V.V., Fomihina I.V., Grigorjev S.V., Zhuk A.E. PRODUCTION OF POROUS POWDER MATERIALS OF SPHERICAL POWDERS OF CORROSION-RESISTANT STEEL. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2012;(3):98-105. (In Russ.) https://doi.org/10.21122/1683-6065-2012-3-98-105
Views:
1995
Email this article 