PRODUCTION OF POROUS POWDER MATERIALS OF SPHERICAL POWDERS OF CORROSION-RESISTANT STEEL
https://doi.org/10.21122/1683-6065-2012-3-98-105
Abstract
Production of porous powder materials from spherical powders of corrosion-resistant steel 12Х18н10Т with formation at low pressures 120–140 mpa in the mold with the subsequent activated sintering became possible due to increase of duration of process of spattering and formation of condensate particles (Si–C) or (Mo–Si) on surface.
About the Authors
V. N. Kovalevskij
Belarusian National Technical University
Belarus
L. P. Pilincnich
Belarusian State University of Informatics and Radioelectronics
Belarus
A. V. Kovalevskaya
Belarusian National Technical University
Belarus
V. V. Savich
Powder Metallurgy Institute of the NAS of Belarus
Belarus
I. V. Fomihina
Powder Metallurgy Institute of the NAS of Belarus
Belarus
S. V. Grigorjev
Belarusian National Technical University
Belarus
A. E. Zhuk
Belarusian National Technical University
Belarus
References
1. G ordeev S. K. Advanced diamond based composites for engineering applications// in Diamond Based Composites, Kluwer, Dordrecht, 1997. P. 1-11.
2. Fizicheskie svoistva almaza: Sprav. Kiev: Naukova dumka, 1987.
3. Gnesin G. G. Issledovaniya i razrabotka neoksidnykh keramicheskikh materialov v Ukraine // Novye materialy i tekhnologii. Kiev: Naukova dumka, 1998. S. 519-528.
4. Kovalevskii V. N., Gordeev S. K., K orchagina S. B., Fomikhina I. V., Zhuk A. E. Strukturoobrazovanie karbidokremnievoi matritsy v kompozitsii almaz-karbid kremniya // Ogneupory i tekhnicheskaya keramika. 2005. № 5. S. 8-14.
5. Klopov S. G., Lesnevskii L. N., Tyurin V. N., Ushakov A. M. Modelirovanie i raschet parametrov elektricheskogo razryada v planarnom magnetrone // Izv. RAN. Ser. fizicheskaya. 2006. T. 70. № 8. S. 1204-1209.
For citations:
Kovalevskij V.N.,
Pilincnich L.P.,
Kovalevskaya A.V.,
Savich V.V.,
Fomihina I.V.,
Grigorjev S.V.,
Zhuk A.E.
PRODUCTION OF POROUS POWDER MATERIALS OF SPHERICAL POWDERS OF CORROSION-RESISTANT STEEL. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2012;(3):98-105.
(In Russ.)
https://doi.org/10.21122/1683-6065-2012-3-98-105
Views:
1992
Email this article 