THE ANALYSIS OF PROCESS OF MELTING OF ALUMINIUM SHAVING AND SLAG IN THE SHORT-FLAME ROTOR FURNACE
Abstract
The analysis of results of 180 casts in the short-flame rotor furnace with use in quality the batch mixture of aluminum shaving, slag and pro-sowing of slag is carried out. Influence of composition of furnace charge on a metallurgical exit and duration of melting is estimated. The compositions of furnace charge providing the maximum metallurgical exit are defined.
About the Authors
L. V. TribushevskiyBelarus
Tribushevskiy Leonid, tel. +375(29)663-19-55
B. M. Nemenenok
Belarus
Nemenenok Boleslav, e-mail: nemenenok@tut.by
G. A. Rumyantseva
Belarus
V. S. Rimoshevskiy
Russian Federation
Rimoshevski Vladislav, Master’s Degree Student, Moscow Institute of Steel and Alloys, Moscow, Russia, tel. +7(962)969-58-02
References
1. Makarov G. S. Razvitie proizvodstva vtorichnogo aljuminija v Rossii [Development of production of secondary aluminum in Russia]. Cvetnye metally – Non-ferrous metals, 2004, no.1, pp. 62–66.
2. Galdin N. M. Ispol’zovanie othodov metalloobrabotki v litejnyh cehah mashinostroitel’nyh zavodov [Use of waste of metal working in foundries of engineering plants]. Litejnoe proizvodstvo – Foundry, 1996, no.12, pp. 10–13.
3. Piskarev D. V., Kazakov P. V., Ul’janov D. S. Fljusovaja obrabotka – prosto i dostupno [Flux processing – simple and available]. Cvetnye metally – Non-ferrous metals, 2010, no.12, pp. 64–68.
4. Makarov G. S. Slitki iz aljuminievyh splavov s magniem i kremniem dlja pressovanija [Ingots from aluminum alloys with magnesium and silicon for pressing]. Moscow, Intermet Inzhiniring Publ., 2011. 521 p.
5. Shmitc K., Domagala J., Haag P. Recikling aljuminija [Recycling of aluminum]. Moscow, Aljusil MViT Publ., 2008. 528 p.
6. Fomin B. A., Moskvitin V. I., Mazov S. V. Metallurgija vtorichnogo aljuminija [Metallurgy of secondary aluminum]. Moscow, EKOMET Publ., 2004. 240 p.
7. Novichkov S. B. Teorija i praktika pererabotki othodov aljuminija v rotornyh naklonnyh pechah [Theory and practice of aluminum waste processing at rotor inclined furnaces]. Avtoref. dokt. diss. Irkutsk, 2007. 40 p
Review
For citations:
Tribushevskiy L.V., Nemenenok B.M., Rumyantseva G.A., Rimoshevskiy V.S. THE ANALYSIS OF PROCESS OF MELTING OF ALUMINIUM SHAVING AND SLAG IN THE SHORT-FLAME ROTOR FURNACE. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(2):42-48.
Email this article 