DEVELOPMENT OF CASTING TECHNOLOGIES DURING FORMATION OF PROPERTIES OF ALUMINUM-BASED MATERIALS WITH CARBON OF DIFFERENT STRUCTURAL CONDITION
Abstract
The paper gives an assessment of existing casting methods used for manufacturing products from aluminum materials with carbon filling compounds. It presents results of comparative studies of properties of aluminum materials in which microcrystalline graphite, fullerene black, nanotubes and an amorphous phase of glass carbon have been used as filling compounds.
About the Author
A. T. Volochko
Physical-Engineering Institute of the NAS of Belarus
Belarus
Belarus
Volochko Aleksandr, Doctor of Technical Sciences, Head of the Laboratory.
10 Kuprevich St., Minsk, Belarus. E-mail: volochkoat@mail.ru, +375 29 675-68-62
References
1. Tsarev G. L. O poluchenii litykh dispersnykh splavov [Production of Cast Dispersed Alloys]. Struktura i svoystva metallov i splavov – Structure and Properties of Metals and Alloys // Minsk, 1974, рр. 39–44.
2. Voskoboynikov V. G., K u d r i n V. A., Yakushev A. M. Obshchaya metallurgiya [General Metallurgy]. Moscow, Akademkniga Publ., 2005. 768 p.
3. Chernysheva T. A., Kobeleva L. I., Bolotova L. K. Diskretno-armirovannye kompozitsionnye materialy s matritsami iz alyuminievykh splavov i ikh tribologicheskie svoystva [Discretely Reinforced Composite Materials with Aluminum Alloy Matrices and their Tribological Properties]. Metally – Metals, 2001, no. 6, pp. 85–98.
4. Volochko A. T. Pererabotka i ispol’zovanie alyuminievykh otkhodov v proizvodstve poroshkov, past, kompozitsionnykh i keramicheskikh materialov [Recycling of Aluminum Wastes for Production of Powders, Pastes, Composite and Ceramic Materials]. Minsk, Belaruskay nauka Publ., 2006. 302 p.
5. RavinA. N., Volochko A. T., Laskovne v A. P. Effektivnost’ normativnogo obespecheniya resursosberegayushchikh materialov i tekhnologiy (na primere razrabotki GOST na antifriktsionnye materialy). Trenie i iznos. 1997, vol. 18. no. 1, pp. 129–131.
6. Alyuminiy: svoystva i fizicheskoe metallovedenie [Aluminum: Properties and Physical Metallurgy]. Moskow, Metallurgiya Publ., 1989. 422 p.
7. Ovchinnikov V. V., Laskovnev A. P., Volochko A. T., Makarova Z h. E. Metody lit’ya kompozitsionnykh alyuminievykh splavov s chastitsami grafita [Casting Methods for Production of Composite Aluminum Alloys Containing Graphite Particles]. Lit’e i metallurgiya – Production and metallurgy, 2002, no. 1, pp. 50–53.
8. Mechanical and microstructural characterization of semisolid rheocast A356 and A357 aluminum alloys for automotiv applications. M. Rosso, T. Romano, P. Giordano, G. L. Chiarmetta. Proc. of 7-th Int. Conf. On Semi-Solid Proc, Of Alloys and Соmр. Tsukuba (Japan), 2002. pp. 151–156.
9. Kushtarov K. M. Issledovanie protsessa formirovaniya fasonnykh izdeliy iz splavov i metallomatrichnykh kompozitov na alyuminievoy osnove v tverdozhidkom sostoyanii [Study of Creation of Formed Parts from Aluminum-based Alloys and Metal Matrix Composites in Solid-liquid State]. Dis. ... kand. tekhn. nauk. Moscow, 2004, 176 p.
10. Zolotukhin V. A., Popov V. A. Perspektivy metallurgii vtorichnykh tsvetnykh metallov stran SNG. Sostoyanie i perspektiva razvitiya tsvetnoy metallurgii Rossii, Ukrainy i Kazakhstana [Development Prospects of Secondary Non-ferrous Metallurgy in CIS Countries in the book «Status and Development Prospects of Non-ferrous Metallurgy in Russia, the Ukraine and Kazakhstan»]. Moscow, Izd-vo «Al’teks» Publ., 2005, 400 p.
11. Volochko A. T., Shegidevich A. A., Kuis D. V. Formirovanie struktury i svoystv kompozitov, poluchennykh pri obrabotke alyuminievogo rasplava ligaturami, soderzhashchimi steklopodobnye uglerodnye chastitsy [Forming of Structure and Properties of Composites Produced by Treatment of Molten Aluminum with Ligatures Containing Glass-like Carbon Particles]. Kompozity i nanostruktury. 2014, vol. 6, no. 2, pp. 2–13.
12. Volochko A. T., Shegidevich A. A. Prochnost’ i iznosostoykost’ shatunov iz kompozita na osnove alyuminiya i stali [Strength and Wear Resistance of Connecting Rods Produced from Aluminumand Steel-based Composite]. Mekhanika mashin, mekhanizmov i materialov, 2014, no. 3(28). pp. 17–21. С
Review
For citations:
Volochko A.T. DEVELOPMENT OF CASTING TECHNOLOGIES DURING FORMATION OF PROPERTIES OF ALUMINUM-BASED MATERIALS WITH CARBON OF DIFFERENT STRUCTURAL CONDITION. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(3):5-11. (In Russ.)
Views:
741
Email this article 