WAYS TO INCREASE PLASTIC PROPERTIES OF A WIRE IN THE CONDITIONS OF DRAWING OF HARDWARE PRODUCTION OF JSC «BSW MANAGEMENT COMPANY OF HOLDING «ВМС»
Abstract
During production of a wire of high groups of durability the problem of ensuring rather high level of ductility is actual. One of options for the prevention of embrittlement of a wire and as, the consequence, increases of plastic properties is use of the device of stabilization of internal tension in a wire. The guidestraightener device improves redistribution of the stretching tension in wire blankets by means of a sign-variable bend. The device of stabilization of internal tension in a wire finds the increasing practical application in the conditions of drawing shop of JSC BSW-management Company of Holding BMC and shows positive results on decrease in number of attacks on reversible twisting.
About the Authors
S. V. Voytenkov
BSW - management company of "BMC" holding
Belarus
Belarus
Voytenkov Sergei, process engineer of steel wiring shop No. 2.
E-mail: sv. voytenkov@bmz.iron, tel (+375-2334-5-64-61).
E. V. Brezgun
BSW - management company of "BMC" holding
Belarus
Belarus
Brezgun Elena, senior engineer of steel wiring shop No 2.
tel. (+3752334-5-40-95)
Review
For citations:
Voytenkov S.V., Brezgun E.V. WAYS TO INCREASE PLASTIC PROPERTIES OF A WIRE IN THE CONDITIONS OF DRAWING OF HARDWARE PRODUCTION OF JSC «BSW MANAGEMENT COMPANY OF HOLDING «ВМС». Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(3):71-73. (In Russ.)
Views:
1712
Email this article 