APPLICATION OF POWDER HIGH-SPEED STEEL AS ANTIFRICTION MATERIAL
https://doi.org/10.21122/1683-6065-2011-3-47-50
Abstract
The influence of disulphide molybdenum additives on antifriction characteristics of powder high-speed steel produced by means of hot hydrostatic pressing is investigated. It is shown that disulphide molybdenum additives promote the decrease of coefficient of friction and temperature in hearth of friction as a result the increase of wear resistance of steel.
About the Authors
M. Bajchichak
Slovak University of Technology, Bratislava
Slovakia
Slovakia
M. Beznak
Slovak University of Technology, Bratislava
Slovakia
Slovakia
A. S. Chaus
Slovak University of Technology, Bratislava
Slovakia
Slovakia
References
1. Wang J., Wei X. P., Christodoulou P., Hermanto H. Rapid tooling for zinc spin casting using arc metal spray technology // Journal of Materials Processing Technology. 2004. Vol. 146. P. 283–288.
2. Gatto A., Iuliano L. Evaluation of inserts for modular thermoplastic injection moulds produced by spin casting // Journal of Materials Processing Technology. 2001. Vol. 118(1–3). P. 411–416.
3. Vezzeti E. Spin casting characterization: An experimental approach for the definition of runners design guidelines // Journal of Materials Processing Technology. 2008. Vol. 196(1–3). P. 33–41.
4. Huan Z., Jordaan G. D. Air-cooling induced from spinning of spin-casting moulds // Applied Thermal Engineering. 2005. Vol. 25(8–9). P. 1183–1194.
5. Huan Z., Jordaan G. D. Galerkin finite element analysis of spin casting cooling process // Applied Thermal Engineering. 2004. Vol. 24(1). P. 95–110.
6. Huan Z., Jordaan G. D. Investigation of the cooling of spin-casting moulds // Applied Thermal Engineering. 2003. Vol. 23(1). P. 17–27.
7. Beznák M., Bajčičák M., Šuba R. The main stages of technological cycle for low melting point alloys casting by tekcast method // Material science and manufacturing technology – MITECH 2009: International scientific conference. 25.-26 June 2009. Prague. Czech Republic.
8. Салтыков С. А. Стериометрическая металлография. М.: Металлургия, 1970.
Review
For citations:
Bajchichak M., Beznak M., Chaus A.S. APPLICATION OF POWDER HIGH-SPEED STEEL AS ANTIFRICTION MATERIAL. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2011;(3):47-50. (In Russ.) https://doi.org/10.21122/1683-6065-2011-3-47-50
Views:
1649
Email this article 