THE PROCESSES OF THE LIQUID METAL AND THE MOLD CORE INTERACTION DURING THE FORMATION OF THEINTERNAL CAVITY OFTHE CASTING
Abstract
The analysis of the relation of physical-mechanical and chemical processes occurring in the metal-core contact area with perfection factors of the mold core is presented. The nature of interrelation of these processes with the formation of dimensional accuracy, geometric relationship, roughness and absence of defects on the internal surface of the casting is defined.
About the Authors
I. B. Odarchenko
Pavel Sukhoi State Technical University of Gomel
Belarus
Belarus
Odarchenko Igor, Gomel State Technical University named after P. O. Sukhoj. Oktober Avenue 48, Gomel, Republic of Belarus. E-mail.: oda2009@gmail.com. Tel.: + 375 44 721 17 26.
I. N. Prusenko
Pavel Sukhoi State Technical University of Gomel
Belarus
Belarus
Prusenko Ivan, Gomel State Technical University named after P. O. Sukhoj. Oktober Avenue 48, Gomel, Republic of Belarus. E-mail.: inprusenko@gmail.com. Tel.: + 375 29 535 69 01.
References
1. Zhukovskij S. S. Holodnotverdejushhie svjazujushhie i smesi dlja litejnyh sterzhnej i form: spravochnik [Cool hardening bindings and mixes for mold cores and molds]. Mosсow, Mashinostroenie Publ., 2010. 256 p.
2. Kukuj D. M., Skvorcov V. A., Andrianov N. V. Teorija i tehnologija litejnogo proizvodstva [The Teory and Technology of Foundry Prodaction]. V 2 ch. Ch. 2. Tehnologija izgotovlenija otlivok v razovyh formah [Technology of Casting Production in Expendable molds]. Minsk, Novoe znanie Publ., 2011. 406 p.
3. Soljakov D. A., Boldin A. N., Jakovlev A. I. Processy gazovydelenija iz sterzhnej gorjachego i holodnogo otverzhdenija [Gas evalution from the cores made by Hot-boxand Cold-box-amin-processes]. Moscow, Mashinostroenie-1, 2004. 200 p.
Review
For citations:
Odarchenko I.B., Prusenko I.N. THE PROCESSES OF THE LIQUID METAL AND THE MOLD CORE INTERACTION DURING THE FORMATION OF THEINTERNAL CAVITY OFTHE CASTING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(4):33-37. (In Russ.)
Views:
1792
Email this article 