MODIFICATION OF EUTECTIC AND PRIMARY PARTICLES OF SILICON IN SILUMINS. DEVELOPMENT PROSPECTS
Abstract
The principal approaches to modification of silumins have been analyzed. Results of the effect of various complex modifying agents on the structure and properties of aluminum-silicon alloys have been presented. Prospects of production of silumins that are different not only in strength properties but also in plastic properties have been analyzed.
About the Author
A. T. Volochko
Physical-Engineering Institute of the NAS of Belarus
Belarus
Volochko Alexander, Physical and Technical Institute of National Academy of Sciences of Belarus, 10 Kuprevich Str., Minsk, 220141, Belarus, E-mail: volochkoat@mail.ru. Тel.: +375296756862.
Belarus
Volochko Alexander, Physical and Technical Institute of National Academy of Sciences of Belarus, 10 Kuprevich Str., Minsk, 220141, Belarus, E-mail: volochkoat@mail.ru. Тel.: +375296756862.
References
1. Kovalev D. A. Issledovanie i razrabotka tehnologii protsessa poperechno-vintovoy prokatki dlya povyisheniya plastichnosti zaevtekticheskih siluminovyih splavov [Research and Development of Helical Rolling Technology for Improvement of Plasticity of Hypereutectic Silumin Alloys: CSc Thesis Abstract]. Moscow, 2011. 16 p.
2. Modifitsirovanie siluminov strontsiem [Modification of Silumins by Strontium]. Minsk, Nauka i Tekhnika Publ., 1985. 143 p.
3. Maltsev M. V. Modifitsirovanie strukturyi metallov i splavov [Modification of Structure of Metals and Alloys]. Moscow, Metallurgiya Publ., 1964. 212 p.
4. Marukovich E. I., Stetsenko V. Yu. Modifitsirovanie splavov [Modification of Alloys]. Minsk, Belaruskaya navuka Publ., 2009. 192 p.
5. Nemenenok B. M. Teoriya i praktika kompleksnogo modifitsirovaniya siluminov [Theory and Practice of Complex Modification of Silumins]. Minsk, Tehnoprint Publ., 1999. 272 p.
6. Shamsuzzoha M., Nasrac L., Berry J. Nano-Refinement of Eutectic and Primary Silicon Fibers in Al-Si Alloys for High Strength Structural Applications AFS American Foundry Society, Proceedings 2012. P. 12–101.
7. Volochko A. T., Sadoha M. A. Alyuminiy: tehnologii i oborudovanie dlya polucheniya lityih izdeliy [Aluminum: Technology and Equipment for Manufacturing of Cast Products]. Minsk, Belaruskaya navuka Publ., 2011. 387 p.
8. Volochko A. T., Korolev S. P., Galushko A. M., Shegidevich A. A. Analiz strukturoobrazovaniya siluminov [Analysis of Structure Formation of Silumins]. Vestsi NAN Belarusi. Ser. fiz.-tehn. navuk = Proccedings of the National Academy of Sciences of Belarus. Physical-Technical Sciences Series. 2013, no. 3, pp. 18–25.
9. Banghong Hu, Hang Li. Grain refinement of DIN226S alloy at lower titanium and boron addition levels = Materials Processing Technology. 74 (1998), pp. 56–60.
10. Nikitin K. V. Issledovanie i razrabotka tehnologicheskih osnov izbiratelnogo modifitsirovaniya siluminov [Research and Development of Technological Basis of Selective Modification of Silumins]. CSc Thesis. Vladimir, 2001. 185 p.
11. Venkateswarlu K., Murti B. S., Chacraborti M. Effect of hot rolling and heat treatment of Al-STi-lB master alloy on the grain refining efficiency of aluminium. Materials Science and Engineering. 2001. Vol. A301, pp. 180–186.
12. Nikitin V. I., Jie Wangi, Kandalova E. G., Makarenko A. G., Li Yong. Preparation of Al-Ti-B grain refiner by SHS technology. Scripta Materialia, 2000. Vol. 42, no. 6, February 28, pp. 561–566.
13. Nikitin V. I., Merzhanov A. G., Makarenko A. G., Kandalova E. G., Lukyanov G. S. SHS method of production of Al-Ti-B master alloy. Book of Abstracts: 4-th International Symposium on SHS. Toledo, Spain, October 6–9, 1997, p. 64.
14. Jie Wanqi, Kandalova E. G., Zhang Ruijie, Nikitin V. I. Preparation of Al3Ti/Al composites with SHS method. Rare Metal Materials and Engineering, 2000.
15. Ispolzovanie kompleksnogo modifikatora na osnove nanodispersnyih poroshkov dlya povyisheniya kachestva otlivok [Application of a Complex Modifier based on Nanodispersed Powders for Improvement of Cast Quality]. A. V. Petridis [and others]. Tehnologiya metallov = Metals Technology. 2005, no. 1, pp. 26–31.
16. Shamsuzzoha M., Juretzko F. R., Haque A. Development of high-strength hypereutectic Al-Si alloys by nano-refining the contituent Si-phases // Aluminum Alloys: Fabrication, Characlterization and Application (TMS (The Minerals, Metalt& Materials Society)), 2008, pp. 207–211.
17. Chernyishova T. A., Kobeleva L. I., Byikov P. A., Bolotova L. K., Kalashnikov I. E., Volochko A. T., Izobello A. Y u. Nanostrukturirovanie dispersno-armirovannyih alyumomatrichnyih kompozitsionnyih materialov [Nanostructuring of Dispersion-reinforced Aluminum Matrix Composite Materials]. Fizika i himiya obrabotki materialov = Physics and Chemistry of Materials Processing, 2012. no. 4, pp. 53–61.
18. Volochko A. T., Klushin V. A., Sokolov V. N., Ovchinnikov V. V., Izobello A. Y u. Porshen dvigatelya vnutrennego sgoraniya [Piston of Internal Combustion Engine]: BY Patent No. 6192, 2010.
19. Volochko A. T., Shegidevich A. A. Sposob polucheniya polufabrikatov iz siluminov [Method of Production of Semifinished Products from Silumins]. Application No. a20130910; submitted 30.07.2013.
20. Volochko A. T., Komarov A. I., Komarova V. I., Izobello A. Yu. Modifitsiruyuschee vozdeystvie submikronnogo dioksida kremniya, strukturirovannogo nanochastitsami bora, ititana, na protsess formirovaniya mikrostrukturyi i svoystv porshnevogo splava [Modifying Effect of Submicron Silicon Dioxide Structured with Nanoparticles of Boron and Titanium on Formation of Structure and Properties of Piston Alloy]. Vestsi NAN Belarusi. Ser. fiz.-tehn. navuk = Proccedings of the National Academy of Sciences of Belarus. Physical-Technical Sciences Series. 2010, no. 2, pp. 11–19.
21. Volochko A. T., Izobello A. Y u., Ovchinnikov V. V. Kompleksnaya obrabotka siluminov dispersnyimi chastitsami i atomarnyim azotom [Complex Treatment of Silumins Using Dispersed Particles and Atomic Nitrogen]. Lit’e i metallyrgia = Foundry production and Metallurgy. 2009, no. 3, pp. 218–226.
Review
For citations:
Volochko A.T. MODIFICATION OF EUTECTIC AND PRIMARY PARTICLES OF SILICON IN SILUMINS. DEVELOPMENT PROSPECTS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2015;(4):38-45. (In Russ.)
Views:
732
Email this article 