CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN
https://doi.org/10.21122/1683-6065-2010-3-28-29
Abstract
It is shown that the way of centrifugal casting into water-cooled mould with vertical rotation axis enables to receive hollow slugs with diameter 100–250 mm, with height under 200 mm with wall thickness under 15 mm of antifriction silumin АК15М3, which will replace expensive antifriction bronze.
About the Authors
V. Ju. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. I. Rivkin
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. P. Gutev
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Марукович Е. И., Стеценко В. Ю. Модифицирование сплавов. Мн.: Беларуская навука, 2009.
Review
For citations:
Stetsenko V.J., Rivkin A.I., Gutev A.P. CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2010;(3):28-29. (In Russ.) https://doi.org/10.21122/1683-6065-2010-3-28-29
Views:
1728
Email this article 