PRODUCTION OF THE WROUGHT INGOTS OF HYPOEUTECTIC SILUMIN
- Р Р‡.МессенРТвЂВВВВВВВВжер
- РћРТвЂВВВВВВВВнокласснРСвЂВВВВВВВВРєРСвЂВВВВВВВВ
- LiveJournal
- Telegram
- ВКонтакте
- РЎРєРѕРїРСвЂВВВВВВВВровать ссылку
Full Text:
Abstract
It is shown that casting in crystallizer with flood-fluid power cooling system allows to produce the wrought ingots out of hypereutectic silumin without application of additional operations of thermoplastic deformation and annealing.
About the Authors
V. Ju. Stetsenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. I. Rivkin
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
A. A. Sidorsky
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Eskin G. I., Panov E. I., Ber L. B. i dr. Vliyanie tekhnologii lit'ya i deformatsii na strukturu i svoistva termouprochnyaemykh zaevtekticheskikh siluminov // Metallurg. 2008. № 7. S. 37-41.
2. Belov M. V. Issledovanie protsessa kristallizatsii Al-Si-splavov i razrabotka legkoplavkikh fosforsoderzhashchikh ligatur s tsel'yu povysheniya kachestva litykh porshnevykh zagotovok: Avtoref. dis. … kand. tekhn. nauk. M., 2007.
3. Afanas'ev V. K., Prudnikov A. N., Ruzhilo A. A., Popova M. V. Perspektivy razvitiya porshnevykh zaevtekticheskikh siluminov // Metallurgiya mashinostroeniya. 2003. № 4. S. 16-18.
4. P rudnikov A. N. Tekhnologiya proizvodstva, struktura i svoistva porshnei dvigatelei iz zaevtekticheskogo deformirovannogo silumina // Izv. vuzov. Chernaya metallurgiya. 2009. № 5. S. 45-47.
5. MarukovichE. I., Stetsenko V. Yu. Modifitsirovanie splavov. Mn.: Belorusskaya nauka, 2009.
6. Stetsenko V. Yu., Rivkin A. I., Gutev A. P. i dr., Nepreryvnoe gorizontal'noe lit'e v struinyi kristallizator slitkov diametrom 70 mm iz silumina AK18 // Lit'e i metallurgiya. 2009. № 3. S. 116-117.
Review
For citations:
Stetsenko V.J., Rivkin A.I., Sidorsky A.A. PRODUCTION OF THE WROUGHT INGOTS OF HYPOEUTECTIC SILUMIN. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2010;(3):65-66. (In Russ.)
Views:
470
ISSN 1683-6065 (Print)
ISSN 2414-0406 (Online)
ISSN 2414-0406 (Online)
Email this article 