EFFECT OF ULTRASOUND ACTIVATION OF SHS-CHARGE ON THE FINAL PRODUCT
https://doi.org/10.21122/1683-6065-2016-1-108-114
Abstract
The paper describes the effect of ultrasound activation of dolomite, which is used for producing refractory material by the SHS method, on the final product. X-ray investigation has demonstrated that ultrasound activation of the initial charge brings about changes in the phase composition of the synthesized product.
About the Authors
V. V. Klubovich
Belarusian National Technical University;
Institute of Technical Acoustics of the NAS of Belarus, Vitebsk
Belarus
Belarus
M. M. Kulak
Institute of Technical Acoustics of the NAS of Belarus, Vitebsk
Belarus
Belarus
V. I. Marusich
Belarusian National Technical University
Belarus
Belarus
V. G. Samoletov
Institute of Technical Acoustics of the NAS of Belarus, Vitebsk
Belarus
Belarus
E. V. Khruschev
Belarusian National Technical University
Belarus
Belarus
References
1. Strelov K. K., Mamykin P. S. Tehnologija ogneuporov [Technology of refractories]. Moscow, Metallurgiya Publ., 1978, 329 p.
2. Belov I. A., Sokolovskij L. V., Podluzskij E. J a., Bacevichus O. G. Dolomitovyj ogneupor [Dolomite refractory]. Patent of Belarus, no. 6910, 2001.
3. Hina B. B., Djatlova E. M., Sarancev V. V., Podbolotov K. B., Povstjanoj A. Ju. Primenenie SVS dlja poluchenija ogneupornyh materialov i izdelij na osnove SiC i Al2O3 [Application of SAF for refractory materials and products based on SiC and Al2O3 ]. Ogneupory i tehnicheskaja keramika = Refractories and Technical Ceramics, 2006, no. 10, pp. 2–13.
4. Merzhanov A. G., Borovinskaja I. P., Shkiro V. M. Javlenie volnovoj lokalizacii avtotormozjashhihsja tverdo-
5. faznyh reakcij [The phenomenon of wave localization avtotormozyaschihsya solid state reactions]. Diplom SSSR na otkrytie № 287 [Diploma of the USSR in the opening number 287]. Bjulleten izobretenij = Bulletin of Inventions, 1984, no. 32, p. 3.
6. Morozov Ju. G., Kuznecov M. V., Merzhanov A. G. Neteplovoe vozdejstvie jelektricheskogo polja na process samorasprostranjajushhegosja vysokotemperaturnogo sinteza [Non-thermal effects of the electric field in the process of SHS].Doklady RAN = Reports of the Russian Academy of Sciences, 1997, vol. 352, no. 6, pp. 771–773.
7. Morozov Yu. G., Kuznetsov M. V., Merzhanov A. G. Electric fields in the processes of self–propagating high– temperature synthesis. International Journal of SHS. 1997, vol. 6, no. 1. pp. 1–13.
8. Microstructural aspects of the self–propagating high temperature synthesis of hexagonal barium ferrites in an external magnetic field. L. Affleck, M. D. Aguas, I. P. Parkin, Q. A. Pankhurst, M. V. Kuznetsov. Journal of the Materials Chemistry. 2000, vol. 10. pp. 1925–1932.
9. Feng A., Munir Z. A. Effect of product conductivity on field–activated combustion synthesis. Journal of the American Ceramic Society. 1997, vol. 80, no. 5, pp. 1222–1230.
10. Mechanistic investigation of electric field–activated self-propagating reactions: experimental and modeling studies / R. Orru, A. Cincotti, G. Cao, Z.A. Munir. Chemical Engineering Science. 2001, vol. 56, no. 2. pp. 683–692.
11. Mal’cev V. M., Gafijatullina G. P., UvarovL. A., Volkov V. T., Zhukov N. I., Egorov N. K. Mullitovyj material dlja proizvodstva ogneupornyh izdelij [Mullite material for the production of refractory products]. Patent RU, no. 2101263, K1SO4V 35/66, 41/87, 1998.
12. Korchagin M. A., Ljahov N. Z. Samorasprostranjajushhijsja vysokotemperaturnyj sintez v mehanicheski aktivirovannyh sostavah [Self-propagating high temperature synthesis in a mechanically activated compositions]. Himicheskaja fizika = Chemical Physics, 2008, vol. 27, no. 1, pp. 73–78.
13. Klubovich V. V., Tomilo V. A., Hrushhev E. V., Lipnickij A. S., Marusich V. I., Abramova A. V.Ustrojstvo dlja ul’trazvukovogo pomola poroshka [Device for ultrasonic grinding powder]. Patent BY, no. 19076. 30.04.2015.
Review
For citations:
Klubovich V.V., Kulak M.M., Marusich V.I., Samoletov V.G., Khruschev E.V. EFFECT OF ULTRASOUND ACTIVATION OF SHS-CHARGE ON THE FINAL PRODUCT. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(1):108-114. (In Russ.) https://doi.org/10.21122/1683-6065-2016-1-108-114
Views:
680
Email this article 