CHOICE OF MATERIAL AND MANUFACTURING TECHNOLOGY OF CASTING
Abstract
As a result of the carried out work abundant type of steel was chosen for casting production of asterisk of the excavator «Kamatsu». This type of steel is widely used as the wearproof steel working in the conditions of abrasive and shock – abrasive wear. Mathematical modeling of process of filling and hardening of casting was done and it confirmed a choice of the technology to produce casting without faulty parts.
About the Authors
L. I. Kupriyanova
Belarusian National Technical University
Belarus
Belarus
O. M. Shikurov
Belarusian National Technical University
Belarus
Belarus
References
1. Matveevskij B. R. Razrabotka metoda ispytanija i issledovanie udarno-abrazivnogo iznashivanija stalej pri razlichnyh skorostjah udara [The development of the test method and the study of impact-abrasive wear of steels at different impact velocities]. Avtoref. kand. tehn. nauk, Moscow, 1980.
2. Guljaev A. P. Metallovedenie [Metal science]. Moscow, Metallurgiya Publ., 1981.
3. Chajkovskij K. R. Iznashivanie dispersno-uprochnjonnyh stalej pri abrazivnom i udarno-abrazivnom iznashivanii [Wear a dispersion-hardened steels with abrasive and shock-abrasive wear]. Avtoref. kand. tehn. nauk, Moscow, 1988.
4. Bodjako M. N., Astapchik S. A., Jaroshevich G. B. Martensitno-starejushhie stali [Maraging steel]. Minsk, Nauka i technika Publ., 1976.
Review
For citations:
Kupriyanova L.I., Shikurov O.M. CHOICE OF MATERIAL AND MANUFACTURING TECHNOLOGY OF CASTING. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2016;(1):151-156. (In Russ.)
Views:
2453
Email this article 