THE INFLUENCE OF GRAVITY COEFFICIENT ON THE STRUCTURE OF CENTRIFUGAL CASTINGS SILUMINA AK18
Abstract
Influence of the gravity coefficient value on structure and extent of allowance zone on machining of castings with diameter of 135 mm from AK18 alloy is investigated. It is established that optimum value of gravity coefficient makes 120–140.
About the Authors
V. Yu. Stecenko
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
K. N. Baranov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
V. V. Novikov
Institute of Technology of Metals of the NAS of Belarus
Belarus
Belarus
References
1. Марукович Е. И., Стеценко В. Ю. Модифицирование сплавов. Минск: Беларуская навука, 2009.
2. Байков А. И. Центробежное литье алюминиевых сплавов и их литейные свойства. М: Машгиз, 1950.
3. Юдин С. Б., Левин М. М., Розенфельд С. Е. Центробежное литье. М.: Машгиз, 1972.
Review
For citations:
Stecenko V.Yu., Baranov K.N., Novikov V.V. THE INFLUENCE OF GRAVITY COEFFICIENT ON THE STRUCTURE OF CENTRIFUGAL CASTINGS SILUMINA AK18. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2013;(3):125-127. (In Russ.)
Views:
471
Email this article 