PULSE FORMATION OF STRUCTURE OF FOUNDRY ALUMINUM ALLOY
https://doi.org/10.21122/1683-6065-2017-1-103-109
Abstract
The estimation of the impact of the SiC powder in the mode of super-deep penetration (SDP) and subsequent heat treatment on the evolution of the fine structure parameters of aluminum casting alloy Al-12%Si are made. Impulse impact on the alloy provided evolution of its structure at different scales. Thus a massive composite material reinforced with the fiber zones was obtained from aluminum alloy casting.
About the Authors
S. M. Usherenko
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
S. N. Grigoriev
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
E. I. Marukovich
Institute of Technology of Metals of the NAS of Belarus
Belarus
Mogilev, 11, Byalynitskogo-Biruli
Belarus
Mogilev, 11, Byalynitskogo-Biruli
Yu. S. Usherenko
Branch of the BNTU "Institute of Improvement of Professional Skills and Staff Retraining on New Directions of Engineering, Technology and Economy"
Belarus
Minsk, 77, Partizansky Ave.
Belarus
Minsk, 77, Partizansky Ave.
A. A. Andrushevich
Belarusian State Agrarian Technical University
Belarus
Minsk, 99, Nezavisimosti ave.
Belarus
Minsk, 99, Nezavisimosti ave.
References
1. Kolachev B. A., Elagin V. I., Livanov V. A. Metallovedenie i termicheskaja obrabotka cvetnyh metallov i splavov [Metallurgy and heat treatment of non-ferrous metals and alloys]. Moscow, MISIS Publ., 1999, 416 p.
2. Andrievskij R. A. Nanomaterialy: koncepcija i sovremennye problem [Nanomaterials: concept and modern problems]. Rossijskij himicheskij zhurnal = Russian Chemical Jornal, 2002, vol. XLVI, no. 5, pp. 50–56.
3. Znamenskij L. G., Ivochkina O. V. Nanotehnologii prigotovlenija ligatur v moshhnom jelektroimpul’snom pole [Nanotechnology preparation ligatures in a powerful electric pulse field]. Izvestija Cheljabinskogo nauchnogo centra = Proceedings of Chelyabinsk Scientific Centr, 2006, vyp. 1(31), pp. 45–49.
4. Meshherjakov Ju. I., Atroshenko S. A., Vasil’kov V. B., Chernyshenko A. I. Mnogourovnevaja kinetika deformirovanija stalej 30HNChM pri odnoosnom udarnom nagruzhenii [Multilevel deformation kinetics 30HNCHM steel under uniaxial impact loading]. Leningrad, 1990, 45 p.
5. Glasmacher U. A. et. al. Physical Review Letters, 96, 195701 (17 May 2006).
6. Usherenko S. M. Modern notions of the effect of superdeep penetration. Journal of Physics and Themophysics, 2002, vol. 75, no. 3, pp. 753–770.
7. Zel’dovich V. I., Frolova N. I., Homskaja I. V., Hejfec A. Je., Usherenko S. M., Dybov O. A. Strukturnye izmenenija zhelezonikelevyh splavah, vyzvannye dejstviem vysokoskorostnogo potoka poroshkovyh chastic. Ch. 1. Jeffekty udarnovolnovogo nagruzhenija [Structural changes in iron-nickel alloys, caused by the action of high-speed flow of powder particles. The effects of a shock loading]. Fizika metallov i metallovedenie = The Physics of Metals and Metallography, 2001, vol. 91, no. 6, pp. 72–79.
8. Usherenko S. M., Marukovich E. I., Usherenko Ju. S., Belous A. I., Petlickij A. N. Formirovanie novyh materialov na osnove litejnogo aljuminievogo splava [Formation of new materials based on aluminum alloy castin]. Inzhenerno-fizicheskij zhurnal = Journal of Engineering Physics, 2011, vol. 84, no. 5, pp. 1095–1099.
9. Panova T. V., Blinov V. I., Kovivchak V. S. Opredelenie vnutrennih naprjazhenij v metallah [Determination of internal stresses in metals]. Omsk, 2004, 22 p.
10. Sistema avtomatizacii rentgenovskih difraktometrov serii «DRON». Programma X-Ray, versija 2.0. Moscow, MGU, 1995.
11. Protasova N. A. Rentgenodifraktometricheskoe issledovanie tonkoj struktury monokristallicheskih lopatok iz nikelevyh splavov [Rentgenodifraktometricheskoe study the fine structure of single crystal blades of nickel alloys]. Diss. kand. techn. nauk, Moscow, VIAM, 1993.
12. Usherenko Ju. S. Modifikacija metallov i splavov vysokoskorostnym potokom tverdyh chastic [Modification of metals and alloys, high-solids stream]. Diss. kand. techn. nauk, Mogilev, 2013.
Review
For citations:
Usherenko S.M., Grigoriev S.N., Marukovich E.I., Usherenko Yu.S., Andrushevich A.A. PULSE FORMATION OF STRUCTURE OF FOUNDRY ALUMINUM ALLOY. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(1):103-109. (In Russ.) https://doi.org/10.21122/1683-6065-2017-1-103-109
Views:
761
Email this article 