OPTIMIZATION OF DESULFURIZATION OF METALL IN CONVERTER SHOP USING DIFFERENT REAGENTS
https://doi.org/10.21122/1683-6065-2017-3-5-10
Abstract
The mathematical models for dependency of consumption various materials for the removal of sulfur from the metal in the converter shop are developed. The restrictions and disturbances that affect the cost of the desulfurization process were found.
About the Authors
V. S. Bogushevsky
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
Ukraine
Kiev, Ukraine, 37, Pobedy ave.
Ukraine
Kiev, Ukraine, 37, Pobedy ave.
M. V. Kalenchuk
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»
Ukraine
Kiev, Ukraine, 37, Pobedy ave.
Ukraine
Kiev, Ukraine, 37, Pobedy ave.
References
1. Djudkin D. A., Zborshhik A. M., Onishhuk V. P. et al. Preimushhestva desul’furacii chuguna ligaturami sistemy Fe–Si–Mg [Advantages of desulphurization of cast iron by ligatures of the Fe-Si-Mg system]. Stal’ - Steel, 1999, no. 4, pp. 26–28.
2. Voronova N. A. Desul’furacija chuguna magniem [Desulfurization of cast iron by magnesium]. Moscow, Metallurgija Publ., 1980, 240 p.
3. Bornackij I. I. Desul’furacija metalla [Desulphurization of metal]. Moscow, Metallurgija Publ., 1970, 320 p.
4. Vergun A. S. Mehanizm processa desul’furacii chuguna magniem [Mechanism of the process of desulphurization of cast iron by magnesium]. Metallurgicheskaja i gornorudnaja promyshlennost’ = Metallurgical and mining industry, 2000, no. 3, pp. 19–22.
5. Moskvitin V. I., Nikolaev I. V., Fomin B. A. Metallurgija legkih metallov [Metallurgy of light metals]. Moscow, MISIS Publ., 2005, 416 p.
6. Zborshhik A. M., Kisilenko V. V., Marincev S. N. Poroshkovaja provoloka dlja glubokoj desul’furacii chuguna magnievymi reagentami [Powder wire for deep desulfurization of cast iron with magnesium reagent.]. Chernaja metallurgija. Bjulleten’ nauchnotehnicheskoj informacii = Ferrous metallurgy. Bulletin of scientific and technical information, 2000, no. 3–4 (1203–1204), pp. 36–38.
7. Jugov P. I. Nauchnye aspekty desul’furacii metalla [Scientific aspects of metal desulfurization]. Metallurg = Metallurgist, 1997, no. 1, pp. 26–29.
8. Bigeev A. M. Metallurgija stali: Uchebnik dlja vuzov [Metallurgy of Steel: A Textbook for Higher Schools]. Moscow, Metallurgija Publ., 1988, 480 p.
9. Turkdogan E. T. Slag composition variations causing variations in steel dephosphorisation and desulphurisation in oxygen steelmaking. ISIJ International, 2000, vol. 40, pp. 827–832.
10. Vnepechnaja obrabotka rasplavov. Metodicheskie ukazanija po izucheniju discipliny [Ladle treatment of melts. Methodical instructions for the study of discipline]. Editor P. O. Bykov. Pavlodar: S. Toraighyrov Pavlodar State University, 2006, 41 p.
11. Atlas shlakov. Sprav. izd. [Atlas slag. Reference book]. Moscow, Metallurgija Pub., 1985, 208 p.
12. Chumakov S. M., Zinchenko S. D. Kompleksnaja tehnologija poluchenija nizkosernistoj stali v KKC OAO «Severstal’«[Complex technology for obtaining low-sulfur steel in the KCTS of OAO «Severstal»]. Proceedings of the 5th Congress of Steelsmelters. Mosсow, 14–17 oktober 1998, Mosсow, 1999.
Review
For citations:
Bogushevsky V.S., Kalenchuk M.V. OPTIMIZATION OF DESULFURIZATION OF METALL IN CONVERTER SHOP USING DIFFERENT REAGENTS. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(3):5-10. (In Russ.) https://doi.org/10.21122/1683-6065-2017-3-5-10
Views:
678
Email this article 