CONTROL OF CHEMICAL COMPOSITION OF CASTING BRASS IN INGOTS USED FOR MANUFACTURE OF STOP VALVES

The article presents the results of a research of the chemical composition of brass foundry grade LS, supplied by domestic and foreign producers, as well as the chemical composition of brass lead grade LC4C used for the manufacture of stop valves. The research was made with use of optical emission spectrometers of various models and a scanning microscope. It was established that the pig delivered by the domestic producers corresponds to parameters of chemical composition for the pig’s foundry brand LS, while in the pig supplied by foreign producers there were found disparities of the chemical composition of certain basic elements. The results of the studies showed that the pig supplied by all producers, as well as the melt obtained with its use, contain in its composition such harmful impurities as S, Bi and P in the amount of 0.001%, 0.0017% and 0.0045%, respectively, that can lead to a decrease in the technological properties of products. It has been established that the use of ARL 3460 and OBLF-QSW 750 emission spectrometers and the Tescan VEGA II LMU scanning electron microscope makes it possible to obtain practically identical values of the content of the main elements and impurities in pigs of foundry and brass lead grade LC40C in studies on determining the chemical composition of the materials under study. 

1. Nemenenok B. M., Gurchenko P. S., Rafalsky I. V. Kontrol’ kachestva produkcii metallurgicheskogo proizvodstva: ucheb. posobie [Quality control of products of metallurgical production: Textbook. Allowance]. Minsk, BNTU Publ., 2007. 407 p.

2. GOST 1020-97. Latuni litejnye v chushkah. Tehnicheskie uslovija [State Standard 1020–97. Brass foundry in pigs. Specifications]. Minsk, 2013. 7 p.

3. GOST 24231-80. Cvetnye metally i ih splavy. Obshhie trebovanija k otboru i podgotovke prob dlja himicheskogo analiza [State

4. Standard 24231–80. Non-ferrous metals and their alloys. General requirements for the selection and preparation of samples for chemical analysis]. Moscow, 2002, pp. 8–12.

5. GOST 1652.1-77. Splavy medno-cinkovye. Metody opredelenija medi [State Standard 1652.1-77. Copper-zinc alloys. Methods for determination of copper]. Moscow, 1997, pp. 1–11

6. GOST 30609-98. Latuni litejnye. Metod rentgenofluorescentnogo analiza [State Standard 30609–98. Foundry brass. X-ray fluorescence analysis method]. Minsk, 2001. 5 p.

7. GOST 17711-93. Splavy medno-cinkovye (latuni) litejnye. Marki [State Standard 17711–93. Copper-zinc alloys (brass) foundry. Brands]. Moscow, 2005, pp. 18–23.

8. ГОСТ 8708-58. Izdelija ogneupornye grafitsoderzhashhie. Tehnicheskie trebovanija [State Standard 8708–58. Products fireproof graphite-containing. Technical requirements]. Мoscow, 1958. 6 p.

9. Guljaev A. P. Metallovedenie [Metallography]. Moscow, Metallurgija Publ., 1986. 544 p.