FORMATION OF THE STRUCTURE AND PROPERTIES OF THE ZONE OF ALLOYING UNDER PLASMA-POWDER SURFACING OF COATS TYPE EuTroLoy 16006.04
https://doi.org/10.21122/1683-6065-2017-3-54-57
Abstract
The paper presents the results of experimental studies on the surface coating of powder EuTroLoy 16006.04 with the help of plasma-powder overlaying. Analysis of the macro-structure made it possible to establish a partial absence of pores, fusions and cracks between the sub-spoon and the deposited layer. Differences in the phase composition and in the mechanical properties of the coatings were established. In places of application of plasma-powder overlaying an increase in hardness has been revealed.
About the Authors
F. I. Panteleenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
V. V. Zakharenko
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
M. V. Spetsian
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Panteleenko F. I., Lyalyakin V. P., Ivanov V. P., Konstantinov V. M. Vosstanovlenie detalej mashin [Restoration of machine parts: a Handbook]. Moscow, Mashinostroenie Publ., 2003.
2. Kapralov E. V. et al. Struktura i svojstva kompozicionnyh iznosostojkih naplavok na stal’ [Structure and properties of composite wear-resistant surfacing on steel]. Novokuzneck, SibGIU Publ., 2014.
3. Stepanova E. I. Iznosoi korrozionnostojkie splavy dlya neftegazovoj promyshlennosti [Wear and corrosion resistant alloys for oil and gas industry]. Armaturostroenie = The valve Industry magazine, 2007, no. 1, pp. 40–44.
4. Babichev A. P. et al. Fizicheskie velichin [Physical magnitudes]. Moscow, Energoatomizdat Publ., 1991.
5. Hudokormova R. N., Panteleenko F. I., Hudokormov D. A. Materialovedenie [Materials science]. Minsk, Novoe znanie Publ.; Moscow, INFRA-M Publ., 2014.
6. Deng H., Shi H., Tsuruoka S. Influence of coating thickness and temperature on mechanical properties of steel deposited with Co-based alloy hardfacing coating. Surface & coatings technol, 2010. No. 325, pp. 3927–3934.
7. Gholipour A. Microstructure and wear behavior of stellite 6 cladding on 17–4PH stainless steel /Gholipour A., Shamania, M.,Ashrafizadeh F. J. Alloys Compd. 2011, no. 509, pp. 4905–4909.
8. Braunli K. A. Statisticheskie issledovaniya v proizvodstve [Statistical studies in the production]. Moscow, Pechat. dvor v Lgr. Publ., 1949.
Review
For citations:
Panteleenko F.I., Zakharenko V.V., Spetsian M.V. FORMATION OF THE STRUCTURE AND PROPERTIES OF THE ZONE OF ALLOYING UNDER PLASMA-POWDER SURFACING OF COATS TYPE EuTroLoy 16006.04. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2017;(3):54-57. (In Russ.) https://doi.org/10.21122/1683-6065-2017-3-54-57
Views:
1973
Email this article 