CREATION OF OWN RAW-MATERIAL BASE FOR FOUNDRY PRODUCTION ON MACHINE-BUILDING ENTERPRISES
https://doi.org/10.21122/1683-6065-2018-2-29-36
Abstract
The article is devoted to the problem of processing dispersed metal wastes, generated at machine-building enterprises. The proposed solution of the problem is recycling in rotary tilting furnaces (RTF) with the production of high-quality charge materials (charge ingots) or foundry alloys directly at the enterprises where these wastes are formed. The results of experimental meltings of gray iron in induction crucible furnace with the replacement of traditional charge materials with ingots, obtained from chips, scale, sludge, etc. in the RTF are presented.
About the Authors
S. L. Rovin
Technolit Co
Belarus
Minsk, Belarus, 24, Kolasa str.
Belarus
Minsk, Belarus, 24, Kolasa str.
L. E. Rovin
Pavel Sukhoi State Technical University of Gomel
Belarus
Gomel, 48, Octyabrya ave.
Belarus
Gomel, 48, Octyabrya ave.
A. S. Kalinichenko
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
L. P. Dolgy
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
V. A. Sheinert
Belarusian National Technical University
Belarus
Minsk, 65, Nezavisimosti ave.
Belarus
Minsk, 65, Nezavisimosti ave.
References
1. D’jakonov O. M. Kompleksnaja pererabotka struzhki i metallosoderzhashhih shlamov [Complex processing of chips and metal-containing sludge]. Minsk, Tehnologija Publ., 2012. 262 p.
2. Rovin S. L. Recikling metalloothodov v rotacionnyh pechah [Recycling of metal wastes in rotary furnaces]. Minsk, BNTU Publ., 2015. 382 p.
3. Rovin S. L. Issledovanie raboty rotacionnyh naklonjajushhihsja plavil’nyh pechej [The study of the work of rotary tilting melting furnaces]. Nauka i tehnika Science and Technique, 2016, no. 1, pp. 18–28.
4. Rovin S. L., Rovin L. E. Pererabotka dispersnyh metalloothodov v litejnyh cehah mashinostroitel’nyh predprijatij [Processing of dispersed metal wastes in foundries of machine-building enterprises]. Litejnoe proizvodstvo Foundry production, 2016, no. 10, pp. 30–34.
5. Mashinostroenie. Encyklopediya. Stali. Chuguny [Mechanical engineering. Encyclopedia. Steel. Cast iron.] Vol. 11–2. G. G. Muhin, A. I. Belakov, N. N. Aleksandrov and oth. Moscow, Mashinostroenie Publ., 2001. 784 p.
Review
For citations:
Rovin S.L., Rovin L.E., Kalinichenko A.S., Dolgy L.P., Sheinert V.A. CREATION OF OWN RAW-MATERIAL BASE FOR FOUNDRY PRODUCTION ON MACHINE-BUILDING ENTERPRISES. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2018;(2):29-36. (In Russ.) https://doi.org/10.21122/1683-6065-2018-2-29-36
Views:
1800
Email this article 