The development of production technology of wire rod from chromium-nickel-molibdenum steel grades with subsequent annealing spheroidization
https://doi.org/10.21122/1683-6065-2019-1-78-82
Abstract
The peculiarity of the rod of chromium-nickel-molybdenum steel grades, used in the production of fasteners and automotive components by cold forming, are the high requirements for the quality of the surface, microstructure and physical and mechanical properties.
In the process of development of production technology were developed and implemented measures to minimize the identified design features of heat treatment furnaces, and developed methods for obtaining the most optimal primary hot-rolled metal microstructure for further spheroidizing annealing
In industrial conditions OJSC «BSW – Management Company of Holding «BMC» was mastered the most optimal regimes of heat treatment of wire rod from chromium-nickel-molybdenum steel grades, which required the consumer a full range of physical and mechanical properties of wire rod from steel grades 38ХНГМ, 40XH2MA and 41Х1 used further in the manufacture of fasteners and automotive components by cold forging.
About the Author
S. V. Аudzeyey
BSW - management company of "BMC" holding
Belarus
Zhlobin city, Gomel region, Belarus, 37, Promyshlennya str.
Belarus
Zhlobin city, Gomel region, Belarus, 37, Promyshlennya str.
Review
For citations:
Аudzeyey S.V. The development of production technology of wire rod from chromium-nickel-molibdenum steel grades with subsequent annealing spheroidization. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2019;(1):78-82. (In Russ.) https://doi.org/10.21122/1683-6065-2019-1-78-82
Views:
2143
Email this article 