Application of classical numerical methods in the calculation of solidification modes of a continuous ingot
https://doi.org/10.21122/1683-6065-2020-3-41-47
Abstract
This paper presents approaches to the computational analysis of solidification and cooling processes of continuously cast billets in order to improve and develop technological modes in the conditions of modern continuous casting machines using FEM.
The application of modern numerical methods for solidification and cooling of workpieces on continuous casting machines is considered. The use of the finite element method is justified when using computational and experimental data for the development and improvement of casting technology.
About the Authors
V. I. TimoshpolskyBelarus
E. I. Marukovich
Institute of Technology of Metal of National Academy of Sciences of Belarus
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
Belarus
Mogilev, Belarus, 11, Byalynitskogo-Biruli str.
I. A. Trusova
Belarusian National Technical University
Belarus
65, Nezavisimosti Ave., Minsk
Belarus
65, Nezavisimosti Ave., Minsk
References
1. Saul’ev V. K. Integrirovanie uravnenij parabolicheskogo tipa metodom setok [Integration of parabolic equations by the grid method]. Moscow, Fizmаshgiz Publ., 1960, 324 p.
2. Bahvalov N. S., Zhidkov N. P., Kobel’kov G. M. Chislennye metody [Numerical methods]. Moscow, Nauka Publ., 1987, 600 p.
3. Kavaderov A. V., Samojlovich Ju.A. Zakonomernosti nagreva plastiny i cilindra odnovremenno izlucheniem i konvekciej [Regularities of heating a plate and a cylinder simultaneously by radiation and convection]. Trudy Vsesojuznogo NII metallurgicheskoj teplotehniki [Proceedings of the All‑Union Research Institute of Metallurgical Heat Engineering]. Sverdlovsk, Sredneural’skoe knizhnoe izdatel’stvo Publ., 1960, pp. 44–58.
4. Samojlovich Ju.A. O primenenii metoda progonki dlja reshenija zadach teploprovodnosti [On the application of the sweep method to solve heat conduction problems]. Metallurgicheskaja teplotehnika = Metallurgical heating engineering. Sverdlovsk, SredneUral’skoe knizhnoe izdatel’stvo, 1965, pp. 176–182.
5. Samojlovich Ju.A. O priblizhennyh sposobah rascheta zatverdevanija otlivok [About approximate methods for calculating the solidification of castings]. IFZh, 1966, vol.11, no. 5, pp. 597–602.
6. Samojlovich Ju.A. Sistemnyj analiz kristallizacii slitka [System analysis of ingot crystallization]. Kiev, Naukova dumka Publ., 1983, 244 p.
7. Timoshpol’skij V. I. et al. Prikladnye zadachi metallurgicheskoj teplofiziki [Applied problems of metallurgical thermal physics]. Minsk, Navuka i tjehnika Publ., 1991, 320 p.
8. Samojlovich Ju.A., Timoshpol’skij V. I. Nagrev stali [Heating steel]. Minsk, Vyshjejshaja shkola Publ., 1990, 314 p.
9. Timoshpol’skij V. I. et el. Promyshlennye teplotehnologii [Industrial heat technologies]. Minsk, Vyshjejshaja shkola Publ., 2000, 320 p.
10. Samojlovich Ju.A. et al. Zatverdevanie stal’nogo slitka v izlozhnice: Metody issledovanija rezhimov zatverdevanija i ohlazhdenija [Solidification of a Steel Ingot in a Mold: Research Methods for Solidification and Cooling Modes]. Minsk, Vyshjejshaja shkola Publ., 2003, 223 p.
11. Marukovich E. I. Matematicheskoe opisanie teplofizicheskih processov pri zatverdevanii nepreryvnogo slitka [Mathematical description of thermophysical processes during solidification of a continuous ingot]. Doklady AN BSSR = The Doklady of the Academy of Sciences of the BSSR, 1989, vol. ХХХIII, no. 8, pp. 708–711.
12. Zenkevich O. K. Metod konechnyh jelementov v tehnike [Finite element method in engineering]. Minsk, Mir Publ., 1975, 318 p.
13. Segerlind L. Dzh. Primenenie metoda konechnyh jelementov [Application of the finite element method]. Moscow, Mir Publ., 1979, 392 p.
14. Ivancov G. P. Nagrev metalla [Metal heating]. Moscow, Metallurgizdat Publ., 1948, 192 p.
15. Timoshpol’skij V. I., Trusova I.A. Sovershenstvovanie tehnologii nepreryvnoj razlivki sortovyh zagotovok. Soobshhenie 2. Raschetnyj analiz processov zatverdevanija i ohlazhdenija nepreryvnolityh zagotovok [Improvement of the technology of continuous casting of billets. Communication 2. Computational analysis of solidification and cooling of continuously cast billets]. Stal’ = Steel, 2019, no. 12, pp. 12–17.
Review
For citations:
Timoshpolsky V.I., Marukovich E.I., Trusova I.A. Application of classical numerical methods in the calculation of solidification modes of a continuous ingot. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2020;(3):41-47. (In Russ.) https://doi.org/10.21122/1683-6065-2020-3-41-47
Views:
407
Email this article 