The effect of special additives on the physico-mechanical properties of mixtures used for the manufacture of cores by the cold-box-amine-process
https://doi.org/10.21122/1683-6065-2023-3-36-40
Abstract
The article presents an analysis of the effect of various special additives on the physical and mechanical properties of sand‑resin mixtures used for the manufacture of cores by the cold‑box‑amine process. Two groups of additives that have the most significant effect on the thermal conductivity of mixtures were studied: additives containing metals or their oxides and carboncontaining additives and composites. The influence of these additives on the tensile strength of the mixtures in the cured state, on their gas content and gas permeability was determined, the results obtained were compared with the characteristics of the reference mixture made without the use of additives.
About the Authors
S. V. Koreniugin
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave
S. L. Rovin
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave
Belarus
Minsk, Belarus, 65, Nezavisimosty Ave
References
1. Kukuj D. M., Skvorcov V.A., Jektova V. N. Teorija i tehnologija litejnogo proizvodstva [Theory and technology of foundry production]. Minsk, Dizajn PRO Publ., 2000, 416 p.
2. Zhukovskij S. S. Holodnotverdejushhie svjazujushhie i smesi dlja litejnyh sterzhnej i form [Cold hardening binders and mixtures for foundry cores and molds]. Moscow, Mashinostroenie Publ., 2010, 256 p.
3. Rovin S. L., Koreniugin S. V. Prichiny vozniknovenija braka otlivok po prosechkam i poisk sposobov ego predotvrashhenija [Causes of the rejection of castings by perforations and the search for ways to prevent it]. Litejnoe proizvodstvo = Foundry production, 2019, no. 12, pp. 6–8.
4. Domotenko F.A., Sirotenko S. I., Karas’ A.N., Mel’nikov A.P., Sadoha M.A., Pasjuk G. I. Sovremennye resursosberegajushhie tehnologii v litejnom proizvodstve OAO “MTZ” [Modern resource‑saving technologies in the foundry production of OJSC “MTW”]. Lit’e i metallurgija = Foundry production and metallurgy, 2016, no.3, pp. 5–10.
Review
For citations:
Koreniugin S.V., Rovin S.L. The effect of special additives on the physico-mechanical properties of mixtures used for the manufacture of cores by the cold-box-amine-process. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2023;(3):36-40. (In Russ.) https://doi.org/10.21122/1683-6065-2023-3-36-40
Views:
202
Email this article 