Ways of energy saving during thermal and chemicalthermal treatment of steel due to acceleration of diffusion processes
https://doi.org/10.21122/1683-6065-2023-4-72-80
Abstract
Some technical and economically effective ways of energy saving in the processes of thermal and chemical‑thermal treatment of steels are analyzed. A classification of ways to save energy by activating structural‑phase transformations in steels is proposed. The results of work on accelerating diffusion processes in steels during thermal improvement, thermal cycling treatment, thermal diffusion galvanizing, nitriding and carburization are summarized. A high potential for energy saving and increased productivity by reducing the time of thermal and chemical‑thermal treatment was noted.
About the Authors
V. M. Konstantinov
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
V. A. Kukareko
United Institute of Mechanical Engineering of the National Academy of Sciences of Belarus
Belarus
Minsk, Belarus, 12, Akademicheskaya str.
Belarus
Minsk, Belarus, 12, Akademicheskaya str.
References
1. Gurchenko P. S. Puti pereosnashhenija jenergoemkih proizvodstv na OAO “MAZ” v 2008–2009 godah i perspektivy razvitija na 2010–2012 gody [Ways to re‑equip energy‑intensive production facilities at OJSC MAZ in 2008–2009 and development prospects for 2010–2012.]. Tehnika, jekonomika, organizacija = Technology, economics, organization, 2009, no. 4, pp. 12–14.
2. Grinchuk P. S. Jenergojeffektivnost’ i kachestvo pri pechnoj termoobrabotke metalla [Energy efficiency and quality in furnace heat treatment of metal]. Lit’e i metallurgiya = Foundry production and metallurgy, 2018, no. 4, pp. 5–13.
3. Konstantinov V. M. Razvitie nauchno‑pedagogicheskoj shkoly kafedry «Materialovedenie v mashinostroenii» [Development of the scientific and pedagogical school of the department “Materials Science in Mechanical Engineering”]. Lit’e i metallurgiya = Foundry production and metallurgy, 2020, no. 4, pp. 36–40.
4. Konstantinov V. M., Shherbakov Je.D., Sinichenko T. N. Issledovanie osobennostej formirovanija struktury konstrukcionnyh stalej s pozicij jenergosberezhenija pri termicheskoj obrabotke [Study of the peculiarities of the formation of the structure of structural steels from the standpoint of energy saving during heat treatment]. Lit’e i metallurgiya = Foundry production and metallurgy, 2010, no. 4, pp. 171–175.
5. Konstantinov V. M., Gurchenko P. S., Stefanovich V.A., Strizhevskaja T. N. K probleme jenergosberezhenija i povyshenija kachestva termicheskoj obrabotki [On the problem of energy saving and improving the quality of heat treatment]. Metallurgija: respublikanskij mezhvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific works, Minsk, Belorusskaja nauka Publ., 2008, vyp. 31, pp. 37–42.
6. Borisenok G. V., Vasil’ev L.A., Voroshnin L. G. Himiko‑termicheskaja obrabotka metallov i splavov [Chemical‑thermal treatment of metals and alloys]. Moscow, Metallurgija Publ., 1981, 424 p.
7. Petrova L. G., Aleksandrov V.A., Demin P. E., Sergeeva A. S. Intensifikacija processov himiko‑termicheskoj obrabotki stalej [Intensification of chemical‑thermal treatment processes of steels]. Moscow, MADI Publ., 2019, 160 p.
8. Zinchenko V. M. Inzhenerija poverhnosti zubchatyh koles metodami himiko‑termicheskoj obrabotki [Engineering of gear surfaces using chemical‑thermal treatment methods]. Moscow, Izd‑vo MGTU im. N. Je. Baumana Publ., 2001, 303 p.
9. Val’ko A. L., Rudenko S. P., Chichin A. N. Vlijanie vysokotemperaturnoj cementacii na velichinu zerna konstrukcionnyh stalej [The influence of high‑temperature carburization on the grain size of structural steels]. Aktual’nye voprosy mashinovedenija = Current issues in mechanical engineering, 2014, vyp. 3, pp. 343–346.
10. Kukareko V.A. Zakonomernosti rosta austenitnogo zerna v stali 18HNVA [Patterns of growth of austenitic grains in steel 18ХНВА]. Metallovedenie i termicheskaja obrabotka = Metallurgy and Heat Treatment, 1981, no. 9, pp. 15–17.
11. Kukareko V.A., Gacuro V. M., Grigorchik A. N., Chichin A. N. Matematicheskoe modelirovanie i mehanizm ukrupnenija austenitnogo zerna pri vysokotemperaturnom nagreve legirovannyh konstrukcionnyh stalej [Mathematical modeling and mechanism of coarsening of austenite grains during high‑temperature heating of alloy structural steels]. Mehanika mashin, mehanizmov i materialov = Mechanics of machines, mechanisms and materials, 2019, no. 3, pp. 58–68.
12. Kukareko V.A., Grigorchik A. N., Chichin A. N. Stroenie granic zeren i mehanizm stabilizacii zerennoj struktury stalej metodom stupenchatogo nagreva do temperatur austenizacii [The structure of grain boundaries and the mechanism of stabilization of the grain structure of steels by the method of stepwise heating to austenitization temperatures]. Mehanika mashin, mehanizmov i materialov = Mechanics of machines, mechanisms and materials, 2020, no. 1(50), pp. 45–54.
13. Biront V. S. Primenenie ul’trazvuka pri termicheskoj obrabotke metallov [Application of ultrasound in heat treatment of metals]. Moscow, Metallurgija Publ., 1978, 168 p.
14. Kukin S. F., Sinichenko T. N. Izuchenie vlijanija predvaritel’noj ul’trazvukovoj obrabotki na rezul’taty normalizacii stali 40H [Study of the influence of preliminary ultrasonic treatment on the results of normalization of 40X steel]. Metallurgija: respublikanskij mezhvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific works, Minsk, BNTU Publ., 2011, vyp. 33, pp. 54–65.
15. Konstantinov V. M., Strizhevskaja T. N. Analiz vlijanija ul’trazvukovoj obrabotki na izmenenie struktury i svojstv uluchshaemoj stali [Analysis of the influence of ultrasonic treatment on changes in the structure and properties of steel being improved]. Aktual’nye problemy prochnosti = Current problems of strength, Minsk, UP IVC Minfina Publ., 2022, pp. 357–359.
16. Konstantinov V. M., Tkachenko G.A. Uprochnenie bystroiznashivaemyh detalej pochvoobrabatyvajushhih plugov nitrocementaciej s lokal’nym ciklicheskim indukcionnym nagrevom [Strengthening of wear parts of soil‑cultivating plows by nitrocarburization with local cyclic induction heating]. Uprochnjajushhie tehnologii i pokrytija = Strengthening technologies and coatings, 2011, no. 2, pp. 44–50.
17. Konstantinov V. M., Berdiev D. M., Yusupov A.A., Tkachenko G.A. Specific features of the structure formation of doeutectoid structural steels at different regimes of thermocyclic treatme. Technical science and innovation, 2022, no.1 (11), pp. 234–240.
18. Kukareko V.A., Konstantinov V. M., Vereshcak N.A., Grigorchik A. N. Structure of commercial titanium subjected to low‑temperature ion nitriding. Mechanics of Machines, Mechanisms and Materials, 2022, no. 1, pp. 48–55.
19. Tkachenko G.A., Koval’chuk A.V., Vereshhak N.A., Paceko E. K. Primenenie ciklicheskogo nagreva pri azotirovanii legirovannyh instrumental’nyh stalej [Application of cyclic heating during nitriding of alloy tool steels]. Metallurgija: respublikanskij mezhvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific works. Minsk, BNTU Publ., 2019, vyp. 40, pp. 179–187.
20. Konstantinov V. M., Ivanickij N. I., Astrejko L.A. Antikorrozionnye cinkovye pokrytija na stal’nyh izdelijah: perspektivy termodiffuzionnyh pokrytij [Anti‑corrosion zinc coatings on steel products: prospects for thermal diffusion coatings]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 4, pp. 107–110.
21. Bulojchik I.A. Termodiffuzionnoe cinkovanie uluchshaemyh i pruzhinnyh stalej [Thermal diffusion galvanizing of tempered and spring steels]. Lit’e i metallurgiya = Foundry production and metallurgy, 2013, no. 4, pp. 121–124.
22. Konstantinov V. M., Bulojchik I.A. Issledovanie strukturnyh i fiziko‑himicheskih faktorov uskorenija diffuzionnyh processov pri formirovanii cinksoderzhashhih sloev na konstrukcionnyh staljah. [Study of structural and physicochemical factors accelerating diffusion processes during the formation of zinc‑containing layers on structural steels]. Metallurgya: respublikansky mezvedomstvennyj sbornik nauchnyh trudov = Metallurgy: republican interdepartmental collection of scientific works. Minsk, BNTU Publ., 2019, vyp. 40, pp. 168–178.
23. Antanovich A.A. et al. Perspektivnye materialy i tehnologii [Advanced materials and technologies]. Minsk, IVC Minfina Publ., 2023, 403 p.
Review
For citations:
Konstantinov V.M., Kukareko V.A. Ways of energy saving during thermal and chemicalthermal treatment of steel due to acceleration of diffusion processes. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2023;(4):72-80. (In Russ.) https://doi.org/10.21122/1683-6065-2023-4-72-80
Views:
203
Email this article 