Employees’ working conditions on molding areas of foundry shops
https://doi.org/10.21122/1683-6065-2023-4-109-116
Abstract
The results of a comprehensive assessment of working conditions on molding areas are presented, and the production factors that determine these conditions are identified. The working conditions of key professions in foundry casting are examined in comparison with regulatory values. It has been established that a comprehensive assessment of working conditions for employees on molding areas of foundry shops should take into account the equipment and manual tools used, the duration of exposure to the working equipment, the type of alloy being melted, and the nature of the production.
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
M. A. Sadokha
Belarusian National Technical University
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Lazarenkov A. M. Klassifikacija proizvodstvennyh faktorov litejnogo proizvodstva [Classification of foundry production factors]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no.3 , pp. 118–122.
2. Lazarenkov A. M., Horeva S.A. Analiz proizvodstvennyh faktorov litejnyh cehov [Analysis of production factors of foundries]. Trudy 24‑j Mezhdunar. nauch.‑tehn. konf. “Litejnoe proizvodstvo i metallurgija 2016, Belarus’”. Minsk, 19–21 oktjabrja 2016 = Proceedings of the 24th Intern. scientific‑technical conf. “Foundry and metallurgy 2016, Belarus.” Minsk, October 19–21, 2016, pp. 117–120.
3. Lazarenkov A. M., Horeva S.A. Klassifikacija rabochih mest litejnogo proizvodstva po uslovijam truda [Classification of foundry workplaces by working conditions]. Lit’e i metallurgija = Foundry production and metallurgy, 2009, no. 3 (52), pp. 92–98.
4. Lazarenkov A.M., Sadokha M.A. Issledovanie shumovogo faktora uslovij truda v litejnom proizvodstve [Study of the noise factor of working conditions in foundries]. Lit’e i metallurgija = Foundry production and metallurgy, 2022, no. 2, pp. 130–136.
5. Lazarenkov A.M., Sadokha M.A. Issledovanie vibrobezopasnosti truda v litejnom proizvodstve [Study of vibration safety in foundry production]. Litejnoe proizvodstvo = Foundry production, 2022, no. 5, pp. 30–35.
6. Lazarenkov A.M., Sadokha M.A., Kot T. P., Novik A.A. Issledovanie uslovij truda po pylevomu faktoru v litejnyh cehah s razlichnym harakterom proizvodstva [Study of working conditions according to the dust factor in foundries with different types of production]. Lit’e i metallurgija = Foundry production and metallurgy, 2023, no. 1, pp.135–137.
7. Lazarenkov A. M. Issledovanie vozduha rabochih zon litejnyh cehov [Study of air in foundry work areas]. Lit’e i metallurgija = Foundry production and metallurgy, 2019, no. 2, pp. 138–142.
8. Lazarenkov A.M., Sadokha M.A. Issledovanie vozdushnoj sredy rabochih zon litejnyh cehov pri sovremennyh tehnologijah izgotovlenija sterzhnej i form [Study of the air environment of working areas of foundries using modern technologies for manufacturing cores and molds]. Litejshhik Rossii = Russian Foundryman, 2022, no.93, pp. 29–32.
9. Lazarenkov A.M., Horeva S.A. Ocenka parametrov mikroklimata rabochih mest litejnyh cehov [Assessment of microclimate parameters of foundry workplaces]. Trudy 25‑j Mezhdunar. nauch.‑tehn. konf. “Litejnoe proizvodstvo i metallurgija 2017. Belarus’”. Minsk, 18–19 oktjabrja 2017 = Proceedings of the 25th Intern. scientific‑technical conf. “Foundry and metallurgy 2017. Belarus.” Minsk, October 18–19, 2017, pp. 216–218.
10. Lazarenkov A.M., Ivanov I.A., Sadokha M.A. Issledovanie teplovogo faktora uslovij truda v litejnom v litejnom proizvodstve [Study of the thermal factor of working conditions in a foundry in foundry production]. Lit’e i metallurgija = Foundry production and metallurgy, 2022, no. 2, pp. 123–129.
Review
For citations:
Lazarenkov A.M., Sadokha M.A. Employees’ working conditions on molding areas of foundry shops. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2023;(4):109-116. (In Russ.) https://doi.org/10.21122/1683-6065-2023-4-109-116
Views:
171
Email this article 