Assessment of the working conditions of the adjuster of molding and coremaking machines in foundries
https://doi.org/10.21122/1683-6065-2025-2-102-106
Abstract
The results of the assessment of working conditions at the workplaces of the adjuster of molding and core making machines are presented, the factors of the production environment determining them are determined. The working conditions of the adjuster are considered in comparison with the standard values. It is established that when assessing the working conditions of a machine adjuster in the molding and core sections of foundries, it is necessary to take into account the equipment and hand tools used, and the length of time spent at the working equipment.
Keywords
foundry,
molding machines,
coremaking machines,
noise,
vibration,
dustiness,
gas pollution,
microclimate
About the Authors
A. M. Lazarenkov
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
I. A. Ivanov
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
M. A. Sadokha
Belarusian National Technical University
Belarus
Belarus
Minsk, Belarus, 65, Nezavisimosti ave.
References
1. Lazarenkov A. M., Horeva S.A. Analiz proizvodstvennyh faktorov litejnyh cehov [Analysis of production factors of foundries]. Litejnoe proizvodstvo i metallurgija 2016. Belarus’: trudy 24‑j Mezhdunar. nauch.‑tehn. konf. = Foundry production and metallurgy 2016, Belarus: Proceedings of the 24th International Scientific and Technical conference. Minsk, 2016, pp. 117–120.
2. Lazarenkov A. M., Sadokha M.A. Issledovanie shumovogo faktora uslovij truda v litejnom proizvodstve [Research of the working conditions noise factor in the foundry production]. Lit’e i metallurgiya = Foundry production and metallurgy, 2022, no. 2, pp. 130–136.
3. Lazarenkov A. M., Sadoha M.A. Issledovanie vibrobezopasnosti truda v litejnom proizvodstve [Research of vibration safety of work in foundry production]. Litejnoe proizvodstvo = Foundry production, 2022, no. 5, pp. 30–35.
4. Lazarenkov A. M., Sadokha M.A., Kot T. P., Novik A.A. Issledovanie uslovij truda po pylevomu faktoru v litejnyh cekhah s razlichnym harakterom proizvodstva [Study of working conditions by dust factor in foundries with different production patterns]. Lit’e i metallurgiya = Foundry production and metallurgy, 2023, no. 1, pp. 135–137.
5. Lazarenkov A. M. Issledovanie vozduha rabochih zon litejnyh cehov [A study of the air quality of working areas in foundries]. Lit’e i metallurgija = Foundry production and metallurgy, 2019, no. 2, pp. 138–142.
6. Lazarenkov A. M., Sadoha M.A. Issledovanie vozdushnoj sredy rabochih zon litejnyh cehov pri sovremennyh tehnologijah izgotovlenija sterzhnej i form [Investigation of the air environment of the working areas of foundries with modern technologies for the manufacture of cores and molds]. Lit’e i metallurgija = Foundry production and metallurgy, 2022, no. 3, pp. 122–126.
7. Lazarenkov A. M., Horeva S.A. Ocenka parametrov mikroklimata rabochih mest litejnyh cekhov [Assessment of microclimate parameters of workplaces in foundry shops]. Litejnoe proizvodstvo i metallurgiya 2017, Belarus’: trudy 25‑j Mezhdunar. nauch.‑tekhn. konf. = Foundry production and metallurgy 2017, Belarus: proceedings of the 25th Int. scientific and technical. conf. Minsk, 2017, pp. 216–218.
8. Lazarenkov A. M., Ivanov I.A., Sadoha M.A. Issledovanie teplovogo faktora uslovij truda v litejnom v litejnom proizvodstve [Research of the thermal factor of working conditions in the foundry production]. Lit’e i metallurgija = Foundry production and metallurgy, 2022, no. 2, pp. 123–129.
9. Lazarenkov A. M. Klassifikacija proizvodstvennyh faktorov litejnogo proizvodstva [Classification of production factors of foundry production]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no. 3, pp. 118–122.
10. Lazarenkov A. M., Horeva S.A. Klassifikacija rabochih mest litejnogo proizvodstva po uslovijam truda [Classification of working places of foundry production by working conditions]. Lit’e i metallurgija = Foundry production and metallurgy, 2009, no. 3, pp. 92–98.
11. Lazarenkov A. M., Kot T. P. Metodika kompleksnoj ocenki uslovij truda v litejnom proizvodstve [The method of comprehensive assessment of working conditions in the foundry production]. Lit’e i metallurgija = Foundry production and metallurgy, 2021, no. 3, pp. 112–117.
12. Lazarenkov A. M. Issledovaniya vliyaniya uslovij truda na rabotayushchih v litejnyh cekhah [Research of influence of working conditions on workers in foundries]. Lit’e i metallurgiya = Foundry production and metallurgy, 2019, no. 2, pp. 134–137.
Review
For citations:
Lazarenkov A.M., Ivanov I.A., Sadokha M.A. Assessment of the working conditions of the adjuster of molding and coremaking machines in foundries. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(2):102-106. (In Russ.) https://doi.org/10.21122/1683-6065-2025-2-102-106
Views:
30
Email this article 