Heat-resistant stainless steels: local and foreign equivalents. Mechanical properties, and application fields
https://doi.org/10.21122/1683-6065-2025-3-80-87
Abstract
Heat‑resistant alloys and steels are a specialized class of stainless materials designed for operation under elevated temperatures and in aggressive environments. These materials are intended for use in applications where conventional steels would lose their properties due to high temperature exposure, oxidation, or corrosion. This study analyzes the equivalence of domestic heat‑resistant steels and alloys to their international counterparts in EN, AISI, ASTM, and AFNOR standards. The mechanical properties of steels within the AISI system are examined. A comparative review of the primary application fields of heat‑resistant steels produced in the CIS and those of the AISI system is also provided.
About the Authors
A. R. Tsyganov
International Institute of Management and Entrepreneurship
Belarus
Belarus
Minsk
1/3, Slavinskogo str.
A. S. Panasyugin
Belarusian National Technical University
Belarus
Belarus
Minsk,
65, Nezavisimosti ave.
L. P. Dolgiy
Belarusian National Technical University
Belarus
Belarus
Minsk,
65, Nezavisimosti ave.
N. P. Masherova
Belarusian State Technological University
Belarus
Belarus
Minsk,
13a, Sverdlova str.
I. I. Kurilo
Belarusian State Technological University
Belarus
Belarus
Minsk,
13a, Sverdlova str
References
1. Grenaderov A. S., Oskirko V. O., Zakharov A. N. [et al.]. Struktura i svojstva austenitnoj stali AISI 316L posle bezvodorodnogo azotirovaniya [Structure and properties of austenitic AISI 316L steel after hydrogen-free nitriding]. Uspekhi prikladnoj fiziki = Successes of Applied Physics, 2022, vol. 10, no. 5, pp. 469–479.
2. Takayuki T. [et al.] Effect of Boron Distribution on the Intergranular Corrosion Resistance of UNS S32506 Duplex Stainless Steels. Journal of the Electrochemical Society, 2019, no. 166, pp. 375–381.
3. Dergach T. A. Vliyanie bora na mikrostrukturu i svojstva trub iz nizkoulerodistoj austenitnoj hromonikelevoj stali [The effect of boron on the microstructure and properties of pipes made of low-carbon austenitic chromium-nickel steel]. Voprosy atomnoj nauki i tekhniki = Issues of atomic science and technology, 2005, no. 5, pp. 80–86.
4. Zepon G. [et al.] Electrochemical corrosion behavior of spray-formed boron-modified supermartensitic stainless steel. Metal Mater Trans A, 2017, no. 48, pp. 2077–2089.
5. Zepon G. [et al.] Design of wear resistant boron-modified supermartensitic stainless steel by spray forming process. Materials
6. & Design, 2015, no. 83, pp. 214–223.
7. Pumpyansky D. A., Pyshmintsev I. Yu., Bityukov S. M., Gervasiev M. A., Gusev A. A. Osobennosti mikrostruktury, fazovogo sostava i vozmozhnosti uprochneniya nerzhaveyushchih stalej s 13–17 % Cr [Features of microstructure, phase composition and the possibility of strengthening stainless steels with 13–17 % Cr]. Izvestiya vysshih uchebnyh zavedenij. Chernaya Metallurgiya = News of higher educational institutions. Ferrous Metallurgy, 2022, no. 65, pp. 644–653.
8. Pridantsev M. V., Talov N. P., Levin F. M. Vysokoprochnye austenitnye stali [High-strength austenitic steels]. Moscow, Metallurgiya Publ., 1969, 247 p.
9. Shpaidel M. O. Novye azotsoderzhashchie austenitnye nerzhaveyushchie stali s vysokimi prochnost’yu i plastichnost’yu [New nitrogen-containing austenitic stainless steels with high strength and ductility]. Metallovedenie i termicheskaya obrabotka metallov = Metal science and heat treatment of metals, 2005, no. 11, pp. 9–13.
10. Bannykh O. A., Blinov V. M., Kostina M. V. Azot kak legiruyushchij element v splavah na osnove zheleza [Nitrogen as an alloying element in iron-based alloys]. Fazovye i strukturnye prevrashcheniya v stalyah: trudy shkoly‑seminara. Vyp. 3 = Phase and structural transformations in steels: Proceedings of the seminar school. Vol. 3. Magnitogorsk: Dom pechati Publ., 2003, pp. 157–192.
11. Trépanier C. [et al.] Effect of modification of oxide layer on NiTi stent corrosion resistance. Journal of biomedical materials research, 1998, no. 43, pp. 433–440.
12. Brown M. P., Matyuvenko N. I. Analiticheskij raschet poverhnostnoj aktivnosti niobiya, cirkoniya i lantana [Analytical calculation of surface activity of niobium, zirconium and lanthanum]. Redkozemel’nye metally i splavy = Rare earth metals and alloys. Moscow, Nauka Publ., 1971, pp. 73–75.
13. Berezovskaya V. V. Sistema legirovaniya vysokoazotistyh austenitnyh stalej, struktura, mekhanicheskie i korrozionnye svojstva [Alloying system for high-nitrogen austenitic steels, structure, mechanical and corrosion properties]. Innovacii v materialovedenii i metallurgii: materialy I Mezhdunar. interakt. nauch.‑prakt. konf. = Innovations in materials science and metallurgy: materials I International. interact. conf. Yekaterinburg, Izd-vo Ural’skogo un-ta, 2012, part 1, pp. 257–266.
Review
For citations:
Tsyganov A.R., Panasyugin A.S., Dolgiy L.P., Masherova N.P., Kurilo I.I. Heat-resistant stainless steels: local and foreign equivalents. Mechanical properties, and application fields. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(3):80-87. (In Russ.) https://doi.org/10.21122/1683-6065-2025-3-80-87
Views:
29
Email this article 