Preview

Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY)

Advanced search

Potentials for improving the surface properties of cast composite materials

https://doi.org/10.21122/1683-6065-2025-3-114-119

Abstract

The service life of components with metallic or ceramic overlay coatings directly depends on a number of their mechanical and physical properties. For parts operating in friction assemblies, the strength of the applied coatings – closely linked to their hardness – is of particular importance. This study presents an analysis of hardness variation across the cross‑section of the coatings and substrate materials. A comparison is made between heat‑treated samples and their untreated counterparts, highlighting notable differences in hardness. The susceptibility to failure of low‑ and medium‑entropy coatings applied via plasma spraying onto cast irons, copper alloys, and composite materials is examined. The work also demonstrates the potential for optimizing the substrate to enhance coating performance.

About the Authors

S. A. Matsinov
Belarusian National Technical University
Belarus

Minsk, 
65, Nezavisimosti ave.



U. A. Kalinichenko
Belarusian National Technical University
Belarus

Minsk,
65, Nezavisimosti ave.



References

1. Hasui A., Morgaki O. Naplavka i napylenie [Surfacing and spraying]. Moscow, Mashinostroenie Publ., 1985, 240 p.

2. Macinov S. A., Kalinichenko V. A. Tehnologija podgotovki i remonta iznoshennyh detalej metodami plazmennogo napylenija na primere kompozicionnyh vtulok skol’zhenija [Technology of preparation and repair of worn parts by plasma spraying methods using composite sliding bushings as an example.]. Innovacionnye tehnologii v agropromyshlennom komplekse – segodnja i zavtra: materialy 8‑j Mezhdunar. nauch.‑prakt. konf. = Innovative Technologies in the Agro‑Industrial Complex – Today and Tomorrow: Proceedings of the 8th International Scientific and Practical Conference. Gomel, 2024, pp. 80–84.

3. GOST 21448–75. Poroshki iz splavov dlja naplavki [State standard & 21448–75. Alloy powders for surfacing]. Moscow, Izd-vo standartov Publ., 1977, 15 p.

4. Studfile [Electronic resource]. https://studfile.net/preview/17015021/page:5/.


Review

For citations:


Matsinov S.A., Kalinichenko U.A. Potentials for improving the surface properties of cast composite materials. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2025;(3):114-119. (In Russ.) https://doi.org/10.21122/1683-6065-2025-3-114-119

Views: 29


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1683-6065 (Print)
ISSN 2414-0406 (Online)