ENERGY SAVING TECHNOLOGY OF LIGATURES PRODUCTION ON THE BASIS OF MOLYBDENUM
https://doi.org/10.21122/1683-6065-2014-2-91-94
Abstract
Data on development of technology of the molybdenum-containing addition alloy production by method of aluminothermic restoration is provided in the article. Influence of conditions of production on quality and metallurgical output of addition alloy is studied. The received addition alloys were tested in industrial conditions at smelting of the low-alloyed steel 35HML and the received results confirmed efficiency of application of the developed addition alloy.
About the Authors
A. G. Slutsky
Belarusian National Technical University
Belarus
Belarus
A. S. Kalinichenko
Belarusian National Technical University
Belarus
Belarus
V. A. Sheynert
Belarusian National Technical University
Belarus
Belarus
References
1. Казачков Е. А. Расчеты по теории металлургических процессов. М.: Металлургия, 1988.
2. Слуцкий А. Г., Калиниченко А. С., Шейнерт В. А., Шульга А. В. Особенности процесса восстановления молибдена при получении легирующих присадок // Металлургия: Республ. межвед. сб. науч. тр. Минск: БНТУ, 2013. Вып. 34. Ч. 1. С. 102–108.
3. Дубровин А. С. Металлотермия специальных сплавов. Челябинск: Изд-во ЮУрГУ, 2002.
4. Слуцкий А. Г., Калиниченк о А. С., Шейнерт В. А. Исследование процесса получения молибденсодержащей лигатуры методом внепечной металлургии // Наука и техника. 2012. № 4. С. 13–17.
Review
For citations:
Slutsky A.G., Kalinichenko A.S., Sheynert V.A. ENERGY SAVING TECHNOLOGY OF LIGATURES PRODUCTION ON THE BASIS OF MOLYBDENUM. Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2014;(2):91-94. (In Russ.) https://doi.org/10.21122/1683-6065-2014-2-91-94
Views:
1624
Email this article 